Siemens Simatic S7-300 Getting Started - Page 8

Browse online or download pdf Getting Started for Industrial Equipment Siemens Simatic S7-300. Siemens Simatic S7-300 16 pages. Automation systems, controlling a physical axis
Also for Siemens Simatic S7-300: User Manual (34 pages), Manual (21 pages), Operating Instructions (4 pages), Operating Instructions (5 pages), Manual (35 pages), Getting Started (8 pages), Application Description (24 pages), Manual (18 pages), Manual (32 pages), Installation And Hardware Manual (20 pages), Getting Started (32 pages)

Print Page
Siemens Simatic S7-300 Getting Started
Preparation
Requirements
● You have an S7-300 station consisting of a power supply module and a CPU 313C or
● STEP 7 as of V5.5 is correctly installed on your PG.
● You have downloaded the sample projects from the Internet or have the CD of sample
● You have set up a project for the S7-300 station.
● The PG is connected to the CPU.
● The CPU is correctly connected to a power supply.
● I/O wiring is not required for this sample.
8
314C.
The table below shows the STEP 7 version you need for each CPU.
CPU
STEP 7 version
313C
STEP 7 as of V5.5 + SP1 or STEP 7 as of V5.3 + SP2 with HSP 203
313C-2 PtP
STEP 7 as of V5.5 + SP1 or STEP 7 as of V5.3 + SP2 with HSP 204
313C-2 DP
STEP 7 as of V5.5 + SP1 or STEP 7 as of V5.3 + SP2 with HSP 203
314C-2 PtP
STEP 7 as of V5.5 + SP1 or STEP 7 as of V5.3 + SP2 with HSP 204
314C-2 DP
STEP 7 as of V5.5 + SP1 or STEP 7 as of V5.3 + SP2 with HSP 203
314C-2 PN/DP
STEP 7 as of V5.5 with HSP 191
projects included with the Technological Functions operating instructions.
WARNING
Operation of an S7-300 as part of plants or systems is subject to special rules and
regulations, which depend on its field of application. Please make sure that you adhere
to the applicable safety and accident prevention regulations, for example IEC 204
(emergency stop systems).
You risk severe injury, or damage to machines and equipment if you ignore these
regulations.
Ensure the S7-300 is completely disconnected before wiring!
You can come into contact with live wires if the PS 307 power supply module is turned
on or the PS power supply cable is connected to the main power supply.
Getting Started - Commissioning a CPU 31xC: Closed-loop control
Getting Started, 08/2011, A5E00105534-03