Siemens Simatic S7-400 Getting Started - Page 23
Browse online or download pdf Getting Started for Industrial Equipment Siemens Simatic S7-400. Siemens Simatic S7-400 36 pages. Block library motor starter sirius for simatic pcs 7 sirius motor starter pcs 7 library v7.1+sp2 / sirius motor starter pcs 7 library v8 migration 8.0+sp1
Also for Siemens Simatic S7-400: Manual (35 pages), Manual (18 pages)
Print Page
Upgrade to PCS7 V7.1
Upgrade from PCS7 MS Library V7.0 SP1 / SP1+HF1 to SIRIUS MS PCS7 Library V7.1.
NOTICE
Damage to library
When you upgrade, the blocks are not to be imported.
Doing so will corrupt the library. If you delete all previous versions of the blocks and clean
up the project (see step 3), it is not necessary to import the same block types.
Procedure
Table 4- 1
Steps
Step Action
1
Close the SIMATIC Manager with the existing project.
•
Install the update/upgrade version of the SIRIUS motor starterPCS7 V7.1 block library.
•
With the installation, deletion of the previous version is requested. Confirm with OK.
•
-> The PCS7 MS block library V7.0 SP1 / SP1+HF1 is deleted.
Install the latest version of the block library.
•
2
Open the existing project in the SIMATIC Manager.
•
Open the CFC charts containing the MS_DIR (FB 552) and MS_REV (FB 553) blocks of the PCS7 MS block
•
library V7.0 SP1 / SP1+HF1 .
SIRIUS Motor Starter PCS 7 Library "V7.1+SP2"/ "V8 Migration V8.0+SP1"
Getting Started, 08/2013, A5E02897539020A/RS-AA/005
4
23