Siemens SIMATIC S7-400H Manual - Page 4
Browse online or download pdf Manual for Industrial Equipment Siemens SIMATIC S7-400H. Siemens SIMATIC S7-400H 5 pages. Fault-tolerant systems
Also for Siemens SIMATIC S7-400H: Manual (10 pages)
Print Page
Preface
System component
Redundant DP slave
interfaces IM 153-2 and IM
153-2FO
DP/PA Coupler or Y-Link
IM 157
Communication module
CP443-1 (Industrial Ethernet,
TCP / ISO t
TCP / ISO transport)
t)
Communication module
CP443-5 Basic (PROFIBUS;
S7 communication)
Notice
There may be further restriction for various modules. Refer to the information in
the corresponding product information and FAQs, or in SIMATIC NET News.
Installing the STEP 7 hardware update
In addition to STEP 7, you also need a hardware update. You can download the
update files directly from the STEP 7 pages on the Internet. To install the updates,
select STEP 7 - -> Configure Hardware , then select the Options - -> Install
Hardware Updates command.
Certification
For details on certifications and standards, refer to the S7-400 Programmable
Controllers, Module Data manual, chapter 1.1, Standards and Certifications.
Place of this documentation in the information environment
This manual can be ordered separately under order no. 6ES7988-8HA11-8AA0. It
is also supplied in electronic format on your "STEP 7" product CD.
iv
Version required or order number
IM 153-2: 6ES7 153-2AA02-0XB0, version 7 or higher
IM 153-2: 6ES7 153-2BA00-0XB0, version 1 or higher
IM 153-2FO: 6ES7 153-2AB01-0XB0, version 6 or higher
IM 153-2FO: 6ES7 153-2AB02-0XB0, version 1 or higher
6ES7 157-0AA81-0XA0, version 1 or higher, and firmware version 3.1
6ES7 157-0AA82-0XA0 version 1 or higher, and firmware version 4.0
6GK7 443-1EX10-0XE0, hardware version 1 or higher, and firmware
version V2.5.5
6GK7 443-1EX11-0XE0, hardware version 1 or higher, and firmware
version V2.5.5
6GK7 443-5FX01-0XE0, hardware version 2 or higher, and firmware
version V2.3.2
Automation System S7-400H Fault-tolerant Systems
A5E00267695-02