Siemens SIMATIC TP1200 Comfort INOX PCT Compact Operating Instructions - Page 19
Browse online or download pdf Compact Operating Instructions for Industrial Equipment Siemens SIMATIC TP1200 Comfort INOX PCT. Siemens SIMATIC TP1200 Comfort INOX PCT 48 pages. Hmi devices; comfort panels
Also for Siemens SIMATIC TP1200 Comfort INOX PCT: Compact Operating Instructions (42 pages)
Print Page
Mounting the device
3.1
Preparing for installation
3.1.1
Check the scope of delivery
Check the scope of delivery for visible signs of damages caused during transport and for
completeness, see chapter "Scope of delivery (Page 8)".
NOTICE
Damaged parts
A damaged part can cause device malfunctions.
Do not install damaged parts.
In the case of damaged parts or incomplete delivery, contact your Siemens representative.
3.1.2
Checking the operating conditions
Note the following aspects before installing the device:
1. Familiarize yourself with the standards, approvals, EMC parameters and technical
specifications for operation of the device. This information is available in the following
chapters:
– Certificates and approvals (Page 33)
– Electromagnetic compatibility (Page 36)
2. Check the mechanical and climatic ambient conditions for operation of the device; see
Technical specifications (Page 33).
3. Follow the notes on use in the operating instructions.
3.1.3
Permitted mounting positions
The HMI device is suitable for installation in:
● Mounting cabinets
● Control cabinets
● Switchboards
● Consoles
Comfort Panels INOX PCT
Compact Operating Instructions, 05/2018, A5E38804191-AA
3
19