Siemens SIMATIC TP700 Comfort Outdoor Operating Instructions Manual - Page 14
Browse online or download pdf Operating Instructions Manual for Industrial Equipment Siemens SIMATIC TP700 Comfort Outdoor. Siemens SIMATIC TP700 Comfort Outdoor 29 pages. Touch-sreen operator control panel
Also for Siemens SIMATIC TP700 Comfort Outdoor: Compact Operating Instructions (38 pages), Compact Operating Instructions (42 pages)
Print Page
The length factor works as:
DriveLength = HMI_Length * (LengthFactor / 100)
Example 1:
HMI_Length = 1000.0 mm
LengthFactor = 100%
DriveLength = 1000.0 * (100/100) = 1000.0 mm
The drive will trigger the cut when the length of the product is equal to the
length specified in the HMI.
Example 2:
HMI_Length = 1000.0 mm
Length Factor = 90%
DriveLength:= 1000.0 *(90/100) = 1000.0 * 0.9= 900.0 mm
The drives will trigger the cut before the product has reached the length
specified in the HMI.
Example 3:
HMI_Length = 1000.0 mm
Length Factor = 110%
DriveLength:= 1000.0 *(110/100) = 1000.0 * 1.1= 1100.0 mm
The drives will trigger the cut after the product has reached the length specified
in the HMI.
To sum up:
The length factor should be really close to 0%
If the cut pieces are shorter than expected set Length Factor > 100 %
If the cut pieces are longer than expected set Length Factor < 100n%
Blade Datum (Blue Display):
This is the position (from 0° to 360°) that the blade will come to rest at. It has been
calibrated at the factory to rest 180° from the cut point.
Blade Speed (Blue Display):
This is the value of the blade speed in % of its capable maximum. It should be set
to ensure a good cut quality with enough force to cut through the desired product.
For more technical support, please go to our website:
www.gillardcutting.com/technical
13