Siemens SIMATIC TP900 Comfort INOX PCT Compact Operating Instructions - Page 18
Browse online or download pdf Compact Operating Instructions for Industrial Equipment Siemens SIMATIC TP900 Comfort INOX PCT. Siemens SIMATIC TP900 Comfort INOX PCT 42 pages. Hmi devices; comfort panels
Also for Siemens SIMATIC TP900 Comfort INOX PCT: Compact Operating Instructions (48 pages)
Print Page
Installing and connecting the device
3.3 Inserting the mounting gasket
2. Place the mounting gasket as shown on the stainless steel face.
①
②
③
3. Check the correct fit of the mounting gasket.
The coding tap must be positioned at the location indicated. The round sections of the
seal and the seal clamps must lie in the cutouts specified for this purpose. If the mounting
gasket was inserted correctly, it lies flat and without warping on the stainless steel face.
The edge of the mounting gasket closes flush with the edge of the stainless steel face.
18
Seal rounding lies below the housing frame
Sealing clamp locks fully into the cutout
Coding tap
Comfort Panels INOX, ITC INOX
Compact Operating Instructions, 09/2017, A5E33472156-AI