Siemens SINAMICS G130 Operating Instructions Manual - Page 25

Browse online or download pdf Operating Instructions Manual for Industrial Equipment Siemens SINAMICS G130. Siemens SINAMICS G130 30 pages. Line filter
Also for Siemens SINAMICS G130: Operating Instructions Manual (24 pages), Operating Instructions Manual (26 pages), Operating Instructions Manual (46 pages), Operating Instructions Manual (24 pages), Operating Instructions Manual (31 pages), Operating Instructions Manual (28 pages), Operating Instructions Manual (30 pages), Operating Instructions Manual (22 pages), Operating Instructions Manual (28 pages), Operating Instructions Manual (30 pages), Operating Instructions Manual (34 pages), Operating Instructions Manual (46 pages), Operating Instructions Manual (26 pages), Operating Instructions Manual (26 pages), Operating Instructions Manual (28 pages), Operating Instructions Manual (42 pages), Operating Instructions Manual (46 pages), Operating Instructions Manual (24 pages), Operating Instructions Manual (24 pages), Operating Instructions Manual (30 pages), Operating Instructions Manual (42 pages), Operating Instructions Manual (38 pages), Operating Instructions Manual (46 pages), Operating Instructions Manual (28 pages), Operating Instructions Manual (22 pages), Operating Instructions Manual (24 pages)

Print Page
Siemens SINAMICS G130 Operating Instructions Manual
4.5

Important functions via BOP20

Description
The BOP20 can be used to execute the following functions (via parameters) that help you
handle your projects more efficiently:
● Restore the factory settings
● Copy from RAM to ROM
● Identification via LED
● Acknowledge error
Restore the factory settings
The factory setting of the complete device can be restored in the CU drive object.
● p0009 = 30
● p0976 = 1
Copy from RAM to ROM
In the CU drive object, you can save all your parameters to the non-volatile memory
(CompactFlash card):
● Press the "P" key for 3 seconds or
● p0977 = 1
Note
Parameter rejection with active identification
This parameter is not accepted if an identification routine (e.g. motor identification routine)
has been selected on a drive.
Basic Operator Panel 20 (BOP20)
Operating Instructions, 03/2013, A5E00809375A
Setting parameters with the BOP20
4.5 Important functions via BOP20
23