Siemens SIPART PS2 Operating Instructions Manual - Page 5

Browse online or download pdf Operating Instructions Manual for Industrial Equipment Siemens SIPART PS2. Siemens SIPART PS2 28 pages. Mounting bracket kit
Also for Siemens SIPART PS2: Installation Instruction (4 pages), Installation Instruction (4 pages), Hardware Installation Manual (30 pages), Technical Description (26 pages), Compact Operating Instructions (35 pages), Kit Installation Instruction (9 pages), Installation Instruction (11 pages)

Print Page

Introduction and general safety notes

1.1

These instructions contain all the information you need for commissioning and using the

device.

It is aimed both at persons mechanically installing the device, connecting it electronically,

configuring the parameters and commissioning it as well as service and maintenance

engineers.

1.2

This device left the factory free from safety problems. In order to maintain this status and to

ensure safe operation of the device, please observe the safety information and warnings

contained in these instructions.

1.3

The device may only be used for the purposes specified in these instructions.

Insofar as they are not expressly stated in these instructions, all changes to the device are

the sole responsibility of the user.

1.4

The regulations of the test certification valid in your country are to be observed.

Electrical connection in hazardous zones with explosive atmospheres

The national directives and laws for hazardous areas valid in your country must be observed

for electrical connection. For example, in Germany these are:

● Operational safety regulations

● Directive for the installation of electrical systems in hazardous areas DIN EN 60079-14

SIPART PS2 with mechanical limit switch module

Operating Instructions (Compact), 04/2007, A5E01179056-01

(previously VDE 0165, T1)