Digital Flash Memory MP3 On-Hold User Manual - Page 4

Browse online or download pdf User Manual for Stereo System Digital Flash Memory MP3 On-Hold. Digital Flash Memory MP3 On-Hold 11 pages. Digital on-hold audio system with analog line capability

Print Page

MP3 On-Hold Audio System

Corded Phone Set-up

step

corded phones

NOTE

GE 2-9450 & 2-9460 Phones

The wiring in the handsets of

GE 9450 and GE 9460 phones is

reversed and your TEHMAs will

require a special crossover

cable to work.

Please contact your dealer

for these special cables.

Telephone Extension Hold Music Activators (TEHMA)

For true "hold button activation" of on-hold audio, each phone extension

requires a "hold music activator". Two activators have been included in your

package. If you require additional activators for other phones, contact your

reseller or visit www.onholdplus.com to purchase them on-line. Most phones

without activators are able to engage the hold music feature by pressing the

(star key twice)

immediately pressing the HOLD button on the phone.

Corded telephone connection

Remove coiled handset cord from base of phone.

Plug short phone cord (supplied) into the "hold music activator" (side marked "B")

and other end to phone base.

Plug end of coiled cord (connected to handset) into jack on the hold music activator

(side marked "A").

NOTE: After connecting, if you can not hear the dial tone (handset sounds "dead"),

unplug the TEHMA and reconnect it in the opposite direction.

System test

(if test fails, see troubleshooting guide)

From any phone in the office with a "hold music activator" attached, dial an

outside phone number (a cell phone works fine).

Place the call on-hold using the HOLD button on the telephone.

Return to call and confirm that the on-hold audio was present on the line while on-hold.

Using the volume control on the rear of the unit, adjust the volume to proper level.

IMPORTANT: Excessive volume will cause the on-hold audio to shut off during

playback.

Deactivating hold music manually

activated inadvertently, it can be deactivated by pressing any key on your phone's dial pad.

Pressing a key will deactivate the feature for the remainder of the call.

Phones with "speakerphone" or "mute" functions

Telephones with "speaker phone" or "mute" function can fool the unit into thinking that

the line is on hold. If this occurs press any key on your phone's dial pad to deactivate the

music. Pressing a key will deactivate the feature for the remainder of the call.

on the telephone keypad and then (optionally)

If, for any reason, the hold music is