Epson 1705C - PowerLite XGA LCD Projector Quick Setup - Page 2

Browse online or download pdf Quick Setup for Projector Epson 1705C - PowerLite XGA LCD Projector. Epson 1705C - PowerLite XGA LCD Projector 4 pages. Release of check tool for network projectors v1.00 for windows
Also for Epson 1705C - PowerLite XGA LCD Projector: User Manual (42 pages), Operation Manual (36 pages), Operation Manual (47 pages), Installation Manual (19 pages), User Manual (1 pages), Parts List (1 pages), Documentation Update (12 pages), Function Manual (5 pages), Specifications (2 pages), Software Manual (2 pages), Product Support Bulletin (25 pages), Product Support Bulletin (22 pages), Product Support Bulletin (28 pages), Product Support Bulletin (41 pages), Product Support Bulletin (34 pages), Product Support Bulletin (28 pages), Product Support Bulletin (15 pages), Product Support Bulletin (22 pages), Quick Start Manual (3 pages)

Print Page
Epson 1705C - PowerLite XGA LCD Projector Quick Setup
2
Turn the focus ring to sharpen the image.
Turn the zoom ring to reduce or enlarge the image.
Focus
3
I f your image looks like
to one side of the screen at an angle. Place it directly in front of the
screen, facing the screen squarely.
4
I f your image looks like
the projector to correct it.
3
Choose a
Presentation Method
How do you want to get images to the projector?
•
T o connect to a notebook, see "If connecting
to a notebook" below.
•
T o project over a wireless network, see
"If projecting wirelessly" on the back of this sheet.
Y ou must have installed the projector's EasyMP™ software and
configured your projector and computer before you can project
wirelessly. See your User's Guide for instructions.
•
T o give a presentation stored on a flash drive, digital camera, or
other USB storage device, see Chapter 5 in your User's Guide.
•
T o connect to your notebook using the included USB cable, see
your User's Guide.
If connecting to a notebook...
1
M ake sure you've turned on the projector and adjusted the image
as described in sections 1 and 2.
2
L ocate the computer cable that came with the projector. Connect
one end to the projector's blue Computer (Component Video)
port.
Connect the other end to your notebook's video-out port or
monitor port.
3
P ress the Source Search button on the projector or the remote
control until your computer image is displayed.
or
, you've placed the projector off
or
, press the
Zoom
or
buttons on
Computer cable
Turn over