Samsung 192T - SyncMaster 192 T User Manual - Page 16
Browse online or download pdf User Manual for Monitor Samsung 192T - SyncMaster 192 T. Samsung 192T - SyncMaster 192 T 49 pages. Tft-lcd monitor
Also for Samsung 192T - SyncMaster 192 T: Service Manual (44 pages)
Print Page
Adjusting Your Monitor
Menu Display Time
Display Mode
(152T/172T)
Source Select
(192T)
The menu will automatically turn off if no adjustments are
made for a certain time period.
You can set the amount of time the menu will wait before
it turns off.
1. Push the Menu (
) button.
2. Push the - button or + button until the Menu Display Time
screen is displayed.
3. Push the Menu (
) button to open the Menu Display Time
adjustment screen.
4. Use the - or + buttons to select 5, 10, 20, 50, 200 seconds.
20 seconds is the default value.
You can see the frequency, the polarity of the operational
signals and the resolution level.
Note
These screens do not allow any changes to the settings,
they are for information only.
1. Push the Menu (
) button.
2. Push the - button or + button until the Display Mode
screen is displayed.
You can see the frequency, the polarity of the operational
signals and the resolution level.
Select Auto Source Select for the monitor to automatically
select the signal sorce. Select Manual Source Select to
manually select the signal source using the Source button.
When push the 'Source' button, then Selects the Video
signal while the OSD is off. (When the Source button is
pressed to change the input mode, a message appears in
the center of the screen displaying the current mode --
analog or digital input signal.)
Note
If you select the Digital mode, you must connect your monitor to
the graphic card with a digital port using the DVI cable.
1. Push the Menu (
) button.
2. Push the - button or + button until the Source Select
screen is displayed.
15