Samsung 241MP - SyncMaster 241 MP Owner's Instructions Manual - Page 37

Browse online or download pdf Owner's Instructions Manual for Monitor Samsung 241MP - SyncMaster 241 MP. Samsung 241MP - SyncMaster 241 MP 41 pages. Tft-lcd tv/monitor
Also for Samsung 241MP - SyncMaster 241 MP: Owner's Instructions Manual (36 pages), Owner's Instructions Manual (35 pages)

Print Page

Troubleshooting: Before Contacting Service Personnel

Before contacting Samsung after-sales service, perform the following simple checks.

If you cannot solve the problem using the instructions below, note the model and serial number of your

set and contact your local dealer.

No sound or picture

Normal picture but no sound

No picture or black and white picture

Sound and picture interference

Blurred or snowy picture,

distorted sound

Remote control malfunctions

"Check Signal Cable" message is

displayed.

On PC mode, "Not Supported Mode"

message is displayed.

On PC mode, horizontal or vertical bars

appear to flicker, jitter or shimmer on the

image.

On PC mode, screen is black and

power indicator light is steady amber

or blinks every 0.5 or 1 seconds

On PC mode, image is not stable and

may appear to vibrate.

On PC mode, image is not centered

on the screen.

You need the Monitor driver software.

N Check that the mains lead has been connected to a wall socket.

N Check that you have pressed the Power ( ) button.

N Check the picture contrast and brightness settings.

N Check the volume.

N Check whether the MUTE button has been pressed on the remote

control.

N Adjust the color settings.

N Check that the broadcast system selected is correct.

N Try to identify the electrical appliance that is affecting the set and

move it further away.

N Plug your set into a different mains socket.

N Check the direction, location and connections of your aerial.

This interference is often due to the use of an indoor aerial.

N Replace the remote control batteries.

N Clean the upper edge of the remote control (transmission window).

N Check the battery terminals.

N Check that the signal cable is firmly connected to the PC or video

sources.

N Check that the PC or video sources are turned on.

N Check the maximum resolution and the frequency of the video

Adapter.

N Compare these values with the data in the Display Modes Timing

Chart.

N Adjust the Coarse or Fine function.

N The TV is using its power management system.

N Move the computer's mouse or press a key on the keyboard.

N Check that the display resolution and frequency from your

computer or video board is an available mode for your set. On your

computer check: Control Panel, Display, Settings.

N If the setting is not correct, use your computer utility programme to

change the display settings.

➣

Your set supports multiscan display functions within the

following frequency domain:

Horizontal frequency: 30 ~ 85 kHz

Vertical frequency: 55 ~ 85 Hz

N Adjust the horizontal and vertical position.

N Download the driver from WWW pages:

http://www.samsungusa.com/monitor

http://www.samsung-monitor.com

English-37