Samsung 3 SERIES User Manual - Page 40

Browse online or download pdf User Manual for Monitor Samsung 3 SERIES. Samsung 3 SERIES 43 pages. Led tv monitor
Also for Samsung 3 SERIES: User Manual (47 pages), User Manual (33 pages), Quick Setup Manual (4 pages), User Manual (20 pages), User Manual (20 pages), User Manual (46 pages)

Print Page

Other Information

Issues

The TV turns off automatically.

There is no picture/video.

RF(Cable/Antenna) Connection

The TV is not receiving all channels.

The picture is distorted: macro block error,

small block, dots, pixelization.

Others

Purple/green rolling horizontal bars and

buzzing noise from the TV speakers with

Component cable connection.

A "Mode Not Supported" message

appears.

Caption on TV menu is greyed out.

There is a plastic smell from the TV.

The TV Signal Strength is unavailable in

the Self Diagnostic Test menu.

The TV is tilted to the side.

The channel menu is greyed out

(unavailable).

Your settings are lost after 30 minutes or

every time the TV is turned off.

You have intermittent loss of audio or

video.

You see small particles when you look

closely at the edge of the frame of the TV.

POP (TV's internal banner ad) appears on

the screen.

The remote control does not work.

✎

This panel uses a panel consisting of sub pixels which require sophisticated technology to produce. However, there may

be a few bright or dark pixels on the screen. These pixels will have no impact on the performance of the product.

Solutions and Explanations

• Ensure the Sleep Timer is set to Off in the Setup menu (p. 26).

• If your PC is connected to the TV, check your PC power settings.

• Make sure the AC power cord is plugged in securely to the wall outlet and the TV.

• When watching TV from an antenna or cable connection, the TV will turn off after 10 - 15 minutes if

there is no signal.

• Check cable connections (remove and reconnect all cables connected to the TV and external

devices).

• Set your external device's (Cable/Sat Box, DVD, Blu-ray etc) video outputs to match the connections

to the TV input. For example, if an external device's output is HDMI, it should be connected to an

HDMI input on the TV.

• Make sure your connected devices are powered on.

• Be sure to select the TV's correct source by pressing the

• Reboot the connected device by reconnecting the device's power cable.

• Make sure the coaxial cable is connected securely.

• Please try Auto Program to add available channels to the channel list. Go to

Auto Program then select Auto and make sure the correct Cable TV signal type is set in the menu.

There are 3 options (STD, HRC and IRC) (p. 20).

• Verify the Antenna is positioned correctly.

• Compression of video contents may cause picture distortion, especially with fast moving pictures

such as sports and action movies.

• A low signal can cause picture distortion. This is not a TV problem.

• Remove the left and right audio connections from the set-top-box. If the buzzing stops, this indicates

that the set-top-box has a grounding issue. Replace the Component video cables with an HDMI

connection.

• Check the supported resolution of the TV, and adjust the external device's output resolution

accordingly. Refer to the resolution settings on page 18 of this manual.

• Caption can not be selected in the TV menu when connected via HDMI or Component or PC (p. 28).

• Caption must be activated on the external device (p. 28).

• This smell is normal and will dissipate over time.

• This function is only available with digital channels from an Antenna / RF/Coax connection (p. 30).

• Remove the base stand from the TV and reassemble it.

• The Channel menu is only available when the TV source is selected.

• If the TV is in the Store Demo mode, it will reset audio and picture settings every 30 minutes. Change

the settings from Store Demo mode to Home Use mode in the Plug & Play procedure. Press the

button to select TV mode, and go to

SOURCE

• Check the cable connections and reconnect them.

• Loss of audio or video can be caused by using overly rigid or thick cables. Make sure the cables are

flexible enough for long term use. If mounting the TV to a wall, we recommend using cables with 90

degree connectors.

• This is part of the product's design and is not a defect.

• Select Home Use under Plug & Play mode. For details, refer to Plug & Play Feature (p. 15).

• Replace the remote control batteries with correct polarity (+/-).

• Clean the transmission window located on the top of the remote control.

• Try pointing the remote directly at the TV from 5~6 feet away.

SOURCE

button on the remote control.

→ Setup → Plug & Play → ENTERE (p. 15).

- Channel -

English