Samsung 400MX - SyncMaster - 40" LCD Flat Panel Display Quick Start Manual - Page 23
Browse online or download pdf Quick Start Manual for Monitor Samsung 400MX - SyncMaster - 40" LCD Flat Panel Display. Samsung 400MX - SyncMaster - 40" LCD Flat Panel Display 28 pages. Quick guide (korean)
Also for Samsung 400MX - SyncMaster - 40" LCD Flat Panel Display: Quick Start Manual (22 pages), Specifications (2 pages), (French) Guía De Inicio Rápido (22 pages), (Korean) Quick Start Manual (21 pages)
Print Page
Troubleshooting
Self-Test Feature Check
Note
Check the following items yourself before calling for assistance. Contact a Service Center for problems
that you cannot solve by yourself.
Self-Test Feature Check
1.
Turn off both your computer and the LCD Display.
2.
Unplug the video cable from the back of the computer.
3.
Turn on the LCD Display.
The figure shown below ("No Signal") appears on a black background when the LCD Display is
working normally even though no video signal is detected: While in the Self-Test mode, the LED
power indicator remains green and the figure moves around on the screen.
4.
Turn off your LCD Display and reconnect the video cable; then turn on both your computer and
the LCD Display
If your LCD Display screen remains blank after using the previous procedure, check your video con-
troller and computer system; your LCD Display is functioning properly.
Warning Messages
You can even view the screen at a resolution of 1920 x 1080. However, you will receive the following
message for a minute; You can choose to change the screen resolution or stay in the current mode
during that time. If the resolution is more than 85Hz, you will see the black screen because the LCD
Display does not support over 85Hz.
Note
Refer to Specifications > Preset Timing Modes for the resolutions or frequencies supported by the
LCD Display.
Maintenance and Cleaning
1) Maintaining the LCD Display Case.
Clean with a soft cloth after disconnecting the power cord.