Samsung 690 Series User Manual - Page 27

Browse online or download pdf User Manual for Monitor Samsung 690 Series. Samsung 690 Series 40 pages. Series 6
Also for Samsung 690 Series: Specifications (36 pages), Installation Manual (50 pages), Installation Manual (48 pages)

Print Page

Intermittent Wi-Fi

• Check the distance between the Modem/Router and the TV. The distance should not exceed 50ft (15.2

m).

• Verify that there are no obstacles between your TV and the Modem/Router.

(Appliances, cordless phones, stone walls/fireplaces, etc. decrease Wi-Fi strength.)

• Check the cable that connects the Modem to the Router (if you use a separate Modem and Router) to see

if it is in good condition. If it is not, replace the cable.

• Connect the TV to your Modem/Router using a CAT 7 cable, and then try to set up a wired network

connection. (MENU > Network > Network Settings).

• Check Network Status (MENU > Network > Network Status) to see if the IP address is invalid, for example,

169.x.x.x. If it is, call your ISP to get a valid IP address, and then ask them to check the connection

between your Modem and Router and the connection between the Modem / Router and the Internet.

• If you see a valid Mac address, call your ISP and ask them to reset your network circuit to re-register the

Mac addresses of your new Modem/Router and the TV.

Netflix problems

• Verify that your Modem/Router is no more than 50 ft (15.2 m) away from the TV.

• Change the DNS to 8.8.8.8. Select MENU > Network > Network Status > DNS Server > Select Manually >

DNS > enter 8.8.8.8 > OK

• Verify that the ESN for Netflix is valid. (Go to MENU > Support > Contact Samsung)

Reset Netflix by selecting MENU > Smart Hub > Smart Hub Reset.

Smart Hub Error Messages

• Verify that the distance between the TV and the Modem/Router does not exceed 50 ft (15.2 m).

• Verify that the TV is connected to the network by checking the Network Status (MENU > Network >

Network Status).

• Reset Smart Hub by selecting the MENU > Smart Hub > Smart Hub Reset.

• Update the TV's software (MENU > Support > Software Update).

• Wait 2 to 3 days for the issue to resolve itself.

[UH8000-ZA]BN68-05868A-03ENG.indb 27

English - 27

2014-03-13

6:06:06