3Com SuperStack 3 Baseline Dual Speed Hub 16-Port TP User Manual
Browse online or download pdf User Manual for Switch 3Com SuperStack 3 Baseline Dual Speed Hub 16-Port TP. 3Com SuperStack 3 Baseline Dual Speed Hub 16-Port TP 9 pages. Superstack 3 baseline dual speed hub series
Print Page®
SuperStack
24-Port TP (3C16411) User Guide
DUA1641-0AAA01
I
NTRODUCTION
®
The SuperStack
3 Baseline Dual Speed Hub is an easy-to-use, 10/100
autosensing Class II hub (repeater). It is ideal for users who want to
connect both Ethernet and Fast Ethernet devices (workstations and other
equipment) to the same hub.
All ports on the Baseline Dual Speed Hub are half duplex, autosensing
10 Mbps and 100 Mbps. Each port senses the speed of the connected
equipment and operates at the appropriate speed.
The Baseline Dual Speed Hub comes with:
One power cord for use with the Baseline Dual Speed Hub
Four standard height, self-adhesive rubber pads
One rack mounting kit
A warranty information sheet with details of online registration
3 Baseline Dual Speed Hub 16-Port TP (3C16410) and
The Baseline Dual Speed Hub is suitable for office use where it can be free
standing or rack-mounted (in a wiring closet or equipment room). The
hub is powered from the AC mains supply
Network Connections
The Baseline Dual Speed Hub has 16 or 24 shielded RJ-45, 10/100
autosensing ports on the front panel. Each port can be connected to
either a 10BASE-T (Ethernet) or a 100BASE-TX (Fast Ethernet) device.
Internally, the hub has two repeater segments (10 Mbps and 100 Mbps)
which are linked by a switch, allowing connected 10 Mbps and 100 Mbps
devices to communicate.
You can connect a 10BASE-T or 100BASE-TX hub or switch to the
Baseline Dual Speed Hub.
1