Epson 3LCD - PowerLite S4 Projector Product Information - Page 3

Browse online or download pdf Product Information for Projector Epson 3LCD - PowerLite S4 Projector. Epson 3LCD - PowerLite S4 Projector 9 pages. User replaceable parts list
Also for Epson 3LCD - PowerLite S4 Projector: Specifications (2 pages), Quick Setup Manual (6 pages), Installation Manual (19 pages), Parts List (1 pages)

Epson 3LCD - PowerLite S4 Projector Product Information

Positioning the Projector

You can install the projector for these viewing setups:
Front
Front/ceiling
When projecting from a rear or overhead position, reorient the
image by changing the
Projection
menu.

Image Size and Projection Distance

The maximum size of the image is determined by the distance
from the projector's lens to the screen. Depending on how you
use the zoom and other settings, the actual size may be smaller.
Projection distance
(wide to tele)
2.9 to 3.9 feet
3.8 to 5.2 feet
5.8 to 7.9 feet
7.8 to 10.5 feet
9.7 to 13.2 feet
19.6 to 26.5 feet
29.4 to 39.8 feet
To determine the exact image size when you know the
projection distance (or the exact projection distance when you
know the desired image size), you can use the Projection
Distance Calculator. You can download this program from the
Epson website at http://support.epson.com.
Rear
Rear/ceiling
setting in the
Extended
Maximum diagonal image size
30 inches (26 × 14 inches)
40 inches (34 × 19 inches)
60 inches (52 × 29 inches)
80 inches (69 × 39 inches)
100 inches (87 × 49 inches)
200 inches (174 × 98 inches)
300 inches (261 × 147 inches)

Turning the Projector On and Off

1. Open the lens cover.
2. Connect the power cord to the projector and plug the other
end into an electrical outlet.
AC power inlet
3. The
light turns orange.
Power
4. Press the
P Power
control.
You hear a beep, the
comes on in about 4 seconds. The
5. Start your video or presentation. If you have connected more
than one video source, use the
remote control to select the one you want to watch.

Turning Off the Projector

1. Press the
P Power
control.
2. When you see the confirmation message, press the
button again.
3. When the projector beeps twice and
orange, unplug the projector.
Caution: Turn off this product when not in use to prolong the life
of the projector.
6/06
Epson PowerLite S4
button on the projector or remote
light flashes green, and the lamp
Power
light stays green.
Power
buttons on the
Source
button on the projector or remote
light turns
Power
Epson PowerLite S4 - 3
P Power