Epson 5550C - PowerLite SVGA LCD Projector Product Information - Page 5
Browse online or download pdf Product Information for Projector Epson 5550C - PowerLite SVGA LCD Projector. Epson 5550C - PowerLite SVGA LCD Projector 6 pages. Epson technical brief for multimedia projectors
Also for Epson 5550C - PowerLite SVGA LCD Projector: Specifications (2 pages), User Manual (1 pages), Technical Brief (7 pages)
Print Page
Projector Lamp Light
Light status
Meaning
Orange and
Projector lamp needs to be replaced.
red flashing
alternately
Steady red
Projector lamp has burned out. Replace it to project
images.
Flashing red
There is a problem with the projector lamp, lamp power
supply, or lamp fuse, or a circuit malfunctioned in the
projector.
Off
Lamp is functioning normally.
Temperature Indicator
Light status
Meaning
Flashing orange
Projector is too hot.
Steady red
Projector has turned off automatically because of
overheating.
Flashing red
There's a problem with the cooling fan or temperature
sensor.
Off
The projector is functioning normally.
Cleaning the Air Filter
Clean the air filter at the bottom of the projector after every
100 hours of use. If it is not cleaned periodically, it can
become clogged with dust, preventing proper ventilation. This
can cause overheating and damage the projector. To clean the
air filter, follow these steps:
1. Turn off the projector and unplug the power cable from the
electrical outlet.
2. Place the projector on its side with the handle at the top so
that the filter is easily accessible.
Note: Placing the projector in this position keeps dust from
getting inside the projector housing.
3. Lift up the tab securing the air filter cover and remove the
cover. (The air filter is attached to the inside of the cover.)
2
air filter
tab
1
EPSON PowerLite 5550C/7550C Multimedia Projector
4. Use a small vacuum cleaner designed for computers or other
office equipment to clean the filter. If you don't have one,
use a dry, lint-free cloth.
If the dirt is hard to remove or if the filter is torn, replace the
air filter.
Note: An air filter comes with each replacement lamp (part
number ELPLP07).
5. Replace the air filter cover.
6. Plug the power cable back into the electrical outlet.
Replacing the Lamp
The projector lamp typically lasts for about 2000 hours of use.
It is time to replace the lamp when:
The projected image gets darker or starts to deteriorate
The projector lamp light is flashing orange and red
alternately
The message LAMP REPLACE appears on the screen when
the projector lamp comes on
Warning: Let the lamp cool before replacing it. Also, don't touch
the glass portion of the lamp assembly; this can cause premature
lamp failure.
1. Turn off the projector and unplug the power cord from the
electrical outlet and the projector. Wait at least 20 minutes
for the bulb to cool.
2. Place the projector on its side with the handle on the top so
you can easily access the lamp cover.
Note: Placing the projector in this position keeps dust from
getting inside the projector housing.
3. Use a screwdriver, coin, or similar object to loosen the
retaining screw on the lamp cover. When the screw is loose,
lift off the lamp cover. (You cannot remove this screw from
the cover.)
9/99
PowerLite 5550C/7550C Multimedia Projector - 5
2
1