Cisco 6901 Standard Manual - Page 26

Browse online or download pdf Manual for IP Phone Cisco 6901 Standard. Cisco 6901 Standard 28 pages. Unified ip phone
Also for Cisco 6901 Standard: Datasheet (5 pages), Administration Manual (10 pages), User Manual (15 pages), Administration Manual (12 pages), User Manual (50 pages), Manual (10 pages)

Print Page

Cisco Unified IP Phones Installation

Step 6

Associate a user to a user group. Assigns users a common list of roles and permissions that apply to all users

in a user group. Administrators can manage user groups, roles, and permissions to control the level of access

(and, therefore, the level of security) for system users.

Note

For more information, see the following sections in the Cisco Unified Communications Manager Administration

Guide:

• End User Configuration Settings section in the "End User Configuration" chapter.

• Adding Users to a User Group section in the "User Group Configuration" chapter.

Step 7

Associate a user with a phone. Provides users with control over their phone for actions such as forwarding

calls or adding speed-dial numbers or services.

Note

For more information, see the Associating Devices to an End User section in the "End User Configuration"

chapter in the Cisco Unified Communications Manager Administration Guide.

Cisco Unified IP Phones Installation

After you have added the phones to the Cisco Unified Communications Manager database, you can complete

the phone installation. You (or the phone user) can install the phone at the location of the user.

Note

Upgrade the phone with the current firmware image before you install the phone. For information about

upgrading, see the Readme file for your phone, located at:

http://tools.cisco.com/support/downloads/go/Redirect.x?mdfid=278875240

For instructions on upgrading the firmware, see the Release Notes, located at:

http://www.cisco.com/en/US/products/ps10326/prod_release_notes_list.html

After the phone connects to the network, the phone startup process begins, and the phone registers with

Cisco Unified Communications Manager. To finish installing the phone, configure the network settings on

the phone depending on whether you enable or disable DHCP service.

If you used autoregistration, you need to update the specific configuration information for the phone such as

associating the phone with a user, changing the button table, or directory number.

Install Cisco Unified IP Phone 6901 and 6911

The following procedure provides an overview of installation tasks for the Cisco Unified IP Phone 6901 and

6911. The procedure presents a suggested order to guide you through the phone installation. Some tasks are

optional, depending on your system and user needs. For detailed procedures and information, see the sources

in the procedure.

Cisco Unified IP Phone

For end users to access Cisco Unified CM User Options, you must add users to the standard Cisco

CCM End Users group.

Some phones, such as those in conference rooms, do not have an associated user.

Cisco Unified IP Phone