Cisco 6941 - Unified IP Phone Slimline VoIP Features - Page 26

Browse online or download pdf Features for IP Phone Cisco 6941 - Unified IP Phone Slimline VoIP. Cisco 6941 - Unified IP Phone Slimline VoIP 29 pages. Two-line ip endpoint supporting both video and light-to-moderate voice communications
Also for Cisco 6941 - Unified IP Phone Slimline VoIP: Datasheet (5 pages), Release Notes (18 pages), Datasheet (5 pages), User Manual (38 pages), Administration Manual (14 pages), Setup Manual (16 pages), User Manual (24 pages), Quick Reference Manual (2 pages), Quick Start Manual (2 pages), Reference Manual (4 pages), Quick Reference Card (2 pages), Administration Manual (19 pages), Manual To Using (7 pages), Quick Reference Manual (2 pages), Quick Start Manual (4 pages)

Print Page

Adjust Handset Rest

If your phone is wall-mounted, you may need to adjust the handset rest to ensure that the receiver does not

slip out of the cradle.

Procedure

Step 1

Remove the handset from the cradle and pull the plastic tab from the handset rest.

Step 2

Rotate the tab 180 degrees.

Step 3

Hold the tab between two fingers, with the corner notches facing you.

Step 4

Line up the tab with the slot in the cradle and press the tab evenly into the slot. An extension protrudes from

the top of the rotated tab.

Step 5

Return the handset to the handset rest.

Power-Saving Mode

Your phone supports the Cisco EnergyWise (EW) program. Your system administrator sets up sleep (power

down) and wake (power up) times for your phone to save energy.

Ten minutes before the scheduled sleep time, the Select button flashes and you receive a message that your

phone will power down at a specific time. If the power-saving mode is enabled by your system administrator,

you hear your ringtone play. The ringtone plays according to the following schedule:

Cisco Unified IP Phone 6921, 6941, 6945, and 6961 User Guide for Cisco Unified Communications Manager 9.0

(SCCP and SIP)

Features of Your Cisco Unified IP Phone