Epson 740c - PowerLite XGA LCD Projector Installation Manual - Page 14

Browse online or download pdf Installation Manual for Projector Epson 740c - PowerLite XGA LCD Projector. Epson 740c - PowerLite XGA LCD Projector 19 pages. Product support bulletin(s)
Also for Epson 740c - PowerLite XGA LCD Projector: Parts List (1 pages), Quick Setup Manual (2 pages), Update Manual (1 pages), User Manual (14 pages), Technical Brief (7 pages), Product Support Bulletin (15 pages), Quick Setup Manual (4 pages)

Print Page

ELPMBUNI

Securing the Upper Assembly Ceiling Plate

Review your projector's distance calculation to determine what distance is recommended from the front of

the lens to the edge of the screen for best picture ratio.

Locate the inverted projectors top of the lens point to a point centered horizontally on the screen and no

higher then the top image edge of the screen).

It is normally better to have the top edge of the lens as close to parallel with the top image edge of the

screen as well.

Before you mount your screen and projector, make sure the mounting location will safely support the

weight of the projector.

NOTE: Make sure to measure from the center of the mounting bracket to the front edge of the lens to

determine the proper placement of the center of the upper assembly.

NOTE: If installing the security kit (ELPMBSEC), please refer to the security kit installation guide

before attaching the ceiling plate to the ceiling or wall.

Secure the ceiling assembly into a solid wood ceiling stud with the three (3) #14 x 2" wood screws

(supplied) or with other (commercially available) hardware depending on your installation environment

(Figure 9).

Ceiling Structure

Wood Screws

Upper Assembly

Installation Manual

Secure the ceiling mount to the center of the wood

stud.

Figure 9

Ceiling Wood Stud

Knurl Knobs (3ea)

Page - 15 -