Cisco 6945 Series Setup Manual - Page 9

Browse online or download pdf Setup Manual for IP Phone Cisco 6945 Series. Cisco 6945 Series 16 pages. 6900 series
Also for Cisco 6945 Series: Datasheet (5 pages), Quick Reference (2 pages), Release Notes (18 pages), User Manual (10 pages), User Manual (38 pages), User Manual (8 pages), Administration Manual (14 pages), Features (29 pages), Quick Start Manual (2 pages), Quick Installation & User Manual (12 pages), Quick Reference User Manual (2 pages), Manual (2 pages), Instructions (3 pages), Quick Start Manual (2 pages), Features Manual (4 pages), User Manual (34 pages), Quick Installation Manual (12 pages), Quick Reference Manual (2 pages)

Print Page
Cisco 6945 Series Setup Manual
Chapter

Reducing Power Consumption on the Phone

You can reduce the amount of energy that the Cisco Unified IP Phone 6921, 6941, 6945, and 6961
consume by scheduling when the phone goes into power save mode. In power save mode, the backlight
on the screen is not lit when the phone is not in use. The phone remains in power save mode for the
scheduled duration or until the user lifts the handset or presses any button. In the Phone Configuration
page on Cisco Unified Communications Administration, configure the following parameters.
•
•
•
•

Footstand

If your phone is placed on a table or desk, the footstand can be connected to the back of the phone for a
higher or lower viewing angle, depending on your preference.
Figure 3-4
of holes on the Cisco Unified IP Phones 6921 and 6941.
the alignment of the tabs on the footstand with the two different sets of holes on the Cisco Unified
IP Phone 6945.
two different sets of holes on the Cisco Unified IP Phone 6961.
Cisco Unified IP Phone 6921, 6941, 6945, and 6961 Administration Guide for Cisco Unified Communications Manager 8.6 (SCCP and SIP)
OL-24567-01
Days Backlight Not Active—Specify the days that the backlight remains inactive.
Backlight on Time—Schedule the time of day that the backlight automatically activates. on the days
listed in the off schedule.
Backlight on Duration—Indicates the length of time that the backlight is active once the backlight
is enabled by the programmed schedule
Backlight Idle Timeout—Defines the period of user inactivity on the phone before the backlight is
turned off.
shows the footstand and the alignment of the tabs on the footstand with the two different sets
Figure 3-6
shows the footstand and the alignment of the tabs on the footstand with the
Reducing Power Consumption on the Phone
Figure 3-5
shows the footstand and
3-9