EPSON PowerLite 7800p Projector
Using the Control Panel
This table describes the functions of the control panel buttons.
Button
Function
Power
Turns the projector on or off.
Help
Displays the online help menu.
Computer/
Switches between the connected Computer and DVI
DVI
sources.
Video/BNC
Switches between the connected video and BNC
sources (Video, S-Video, and BNC).
Menu
Displays the on-screen menu system.
ESC
Displays the previous menu when you're viewing a
menu.
Auto/Enter
Selects an option when the menu or help system is
active. When computer images are displayed, press to
auto-adjust the image.
Tracking
Eliminates vertical banding that may be present in
+
–
and
some computer images. Use the Tracking buttons as
arrow keys to navigate the on-screen menu and help
systems.
Sync
Corrects blurriness that may be present in some
+
–
and
computer images. Use the buttons as arrow keys to
navigate the on-screen menu and help systems.
Shift
Press and hold to use the Tracking and Sync buttons.
A/V Mute
Turns off audio and video, displaying the black, blue,
or user logo background. Press again to turn audio
and video back on.
Resize
Adjusts how an image fits into the display area.
Keystone
Squares an image that is "keystoned" or tapered on
the sides after tilting up the projector.
Volume
Increases or decreases the sound.
12
EPSON PowerLite 7800p Projector
-
Controlling Multiple Projectors
If you're using more than one projector, you can control all
the projectors—or just selected ones—by using the projector
ID system with just one remote control. To operate a
projector, you have to set the remote control's ID to match
that of the projector. Or you can control all of the projectors
simultaneously by setting the remote control's ID to zero.
Setting the Projector ID
The projector's default ID is 1. If you need to change it,
follow these steps:
1. Access the projector's Advanced2 menu, highlight
and press
Projector ID
Video
Video
Brightness Control
Brightness Control
Audio
Audio
Projector ID
Projector ID
Effect
Effect
Network
Network
Setting
Setting
COM Port
COM Port
User's Logo
User's Logo
Auto setup
Auto setup
Advanced1
Advanced1
BNC Sync Termination
BNC Sync Termination
Advanced2
Advanced2
Reset
Reset
About
About
Reset All
Reset All
[ ESC ]: Return
[ ESC ]: Return
[
[
/
/
]: Select
]: Select
2. Press the right or left side of the
increase or decrease the ID value.
3. Press
to set the value.
Enter
4. When done, press
Setting the Remote Control ID
The remote control's default ID is zero. If you need to change
it, follow these steps:
1. Press the
button on the remote
ID
control. You see it light up.
2. Press one of the numbered
buttons on the remote
control to select the desired
ID (0 through 9). Select zero
to control all projectors, or
select a number to match the
ID of the projector(s) you
want to operate.
The
button's light shuts off and the new ID is registered.
ID
If you would like to check the remote control's current ID,
press the
button twice. Count the number of flashes; this
ID
number corresponds to the remote control's ID. If it doesn't
flash, the ID is set to zero.
5/03
.
Enter
:
High
High
Low
Low
: 1
: 1
Set
Set
Set
Set
:
RS-232C
RS-232C
USB
USB
:
:
ON
ON
OFF
OFF
:
ON OFF
ON
OFF
Execute
Execute
[Menu]: Exit
[Menu]: Exit
[
[
]: Set
]: Set
pointer button to
to exit the menu system.
ESC
Zero
Print Page