Epson 7850p - PowerLite XGA LCD Projector Product Support Bulletin - Page 26

Browse online or download pdf Product Support Bulletin for Projector Epson 7850p - PowerLite XGA LCD Projector. Epson 7850p - PowerLite XGA LCD Projector 34 pages. Release of check tool for network projectors v1.00 for windows
Also for Epson 7850p - PowerLite XGA LCD Projector: User Manual (42 pages), Operation Manual (36 pages), User Manual (12 pages), Replacement Parts (1 pages), Operation Manual (47 pages), Product Support Bulletin (30 pages), Installation Manual (5 pages), Quick Setup (2 pages), Brochure & Specs (2 pages), Product Information Manual (25 pages), Technical Brief (7 pages), Product Support Bulletin (25 pages), Product Support Bulletin (38 pages), Product Support Bulletin (12 pages), Product Support Bulletin (42 pages), Product Support Bulletin (22 pages), Product Support Bulletin (28 pages), Product Support Bulletin (41 pages), Product Support Bulletin (38 pages), Product Support Bulletin (28 pages), Product Support Bulletin (15 pages), Product Support Bulletin (22 pages)

Print Page

Settings Display

Uncheck the boxes for the buttons

that you do not want to display in

Advanced Mode.

[Note] Be sure to set the projector to Network ON in Standby Mode in the Extended Menu.

1) Download "Epson12378.exe" from Epson website. This file contains

"ProjectorControlSetup.exe" which is used to install EPSON Projector Control for

Windows V.1.00 on the computer.

2) Set up your computer and the projector to connect over a network.

3) Start the EPSON Projector Control software as follows: "Start" "Program" "EPSON

Projector" "Projector Control V1.00." Then the main screen is displayed. Click

"Tool" "Settings" on the main screen. The setting screen is displayed.

4) Enter the Projector IP Address, click "OK" to save, and close the setting screen.

Page 4 of 5

PSB.2007.09.001

Uncheck the boxes for

the buttons that you do

not want to display in

Simple Mode.