Digital Home Systems Mi Casa Verde Vera 2 Integration Manual - Page 2
Browse online or download pdf Integration Manual for Switch Digital Home Systems Mi Casa Verde Vera 2. Digital Home Systems Mi Casa Verde Vera 2 5 pages. Dhs z-wave in-wall double switch
Also for Digital Home Systems Mi Casa Verde Vera 2: Integration Manual (5 pages)
Print Page
Digital Home Systems Pty Ltd
Integration Manual for Mi Casa Verde Vera 2/3/Lite (UI5)
2.2 Exclusion from Z-Wave home network
2.2.1 Press the Z-Wave button on the Vera for at least 7 sec and release, the Z-Wave LED will start to flash fast, check
the system interface for the following message:
2.2.2 Press one of the buttons wired to the DHS-ZW-SWIW-01, the Z-Wave LED on the Vera will flash quickly for a couple
seconds, the following message will appear on the system interface:
2.3 Inclusion to Z-Wave home network
2.3.1 Press the Z-Wave button on the Vera, the Z-Wave LED on Vera will flash slowly, the following message will appear
on the system interface:
2.3.2 Press one of the buttons wired to the DHS-ZW-SWIW-01, the Z-Wave LED on the Vera will flash quickly for a couple
seconds, the following message will appear on the system interface:
Please note that the Node and Device number in the above screen are only an examples
2.3.3 Press the Z-Wave button on the Vera to exit the inclusion mode, the Vera will process Z-Wave reconfiguration.
2.4
After the Vera finishes Z-Wave reconfiguration and the Z-Wave LED is on, go into 'Devices/All' in the system interface, you
will find the DHS-ZW-SWIW-01 as three new devices, '1', '2' and '_Appliance Module' under no room.
Note: This device has two independent switches and one main virtual control switch, which operates as a main ON/OFF for
both switches.
2
PO Box 353
Rosanna, Victoria
3084
Australia