Siemens CM633GBS1B/04 Instruction Manual - Page 13

Browse online or download pdf Instruction Manual for Oven Siemens CM633GBS1B/04. Siemens CM633GBS1B/04 48 pages.

Print Page

Starting or interrupting operation

To start operation or to interrupt an operation which has
started running, press the Start/Stop button. The
cooling fan may continue to run after an operation is
interrupted.
Press the On/Off button to delete all settings.
If you open the cooking compartment door during
operation, operation is interrupted. Close the cooking
compartment door to continue operation.

Selecting an operating mode

If you want to set an operating mode, the appliance
must be switched on.
Press the menu button.
1.
The operating modes menu opens.
Use the rotary selector to select the required
2.
operating mode.
Depending on the operating mode, different options
are available.
Use the
arrow to reach the required operating
¿
3.
mode.
Use the rotary selector to change the selection.
4.
Depending on the option, change different settings.
Press the Start/Stop button to start.
5.

Setting the type of heating and temperature

After the appliance is switched on, the suggested type
of heating appears with the temperature. You can start
this setting immediately with the Start/Stop button.
For other settings, you can change the values as shown
in the pictures.
Example: 4D Hot air at 180 °C
Use the rotary selector to change the type of
1.
heating.
Press the arrow
to switch to the temperature.
¿
2.
Use the rotary selector to change the temperature.
3.
Press the Start/Stop button.
4.
The set type of heating and the temperature are shown
in the display.

Rapid heat up

You can use the
button to heat up the cooking
c
compartment particularly quickly.
The rapid heat up function is not possible for all types of
heating.
Suitable type of heating:
4D hot air
:
To ensure an even cooking result, do not place your
food and the accessory in the cooking compartment
until rapid heating is complete.
Setting
Ensure you have selected a suitable type of heating.
The temperature must be set to above 100 °C,
otherwise the rapid heating function cannot be started.
Set the type of heating and temperature.
1.
Press the
c
button.
2.
The
symbol appears on the left next to the
c
temperature. The progress line begins to fill up.
When rapid heating is complete, a signal sounds. The
symbol goes out. Place your dish in the cooking
c
compartment.
Notes
Rapid heating is cancelled if you change the type of
■
heating.
If a cooking time has been set, this runs
■
independently of rapid heating and counts down
immediately when the operation is started.
You can use the
button to check the current
l
■
cooking compartment temperature during rapid
heating.
Cancelling
Press the
button. The
c
the display.
Operating the appliance
symbol disappears from
c
en
13