Siemens CM633GBS1B/25 Instruction Manual - Page 22

Browse online or download pdf Instruction Manual for Oven Siemens CM633GBS1B/25. Siemens CM633GBS1B/25 48 pages.

Print Page

Trouble shooting

3Trouble shooting

If a fault occurs, there is often a simple explanation.

T r o u b l e s h o o t i n g

Before calling the after-sales service, please refer to the

fault table and attempt to correct the fault yourself.

If a dish does not turn out as well as you had

Note:

hoped, refer to the table section at the end of the

instruction manual, where you will find plenty of tips and

Fault table

If an error message beginning with 'E' is shown, e.g.

E0111, switch the appliance off and then on again. If

Fault

The appliance does not work

Although the appliance is switched

on, it cannot be operated; the

symbol is shown in the display

The cooking compartment does not

heat and "Demo mode on" is shown in

the display

The appliance will not start and

"Cooking compartment too hot"

appears on the display

The interior lighting has failed

--------

Maximum operating time exceeded

Your appliance automatically ends the operation if no

duration has been set and the setting has not been

changed for a long time.

The point at which this occurs depends on the

temperature or grill setting that has been set.

A message appears on the display on the appliance to

say that the operation is being ended automatically. The

operation is then cancelled.

To use the appliance again, first switch it off. To switch

the appliance back on again set the required operation.

Set a cooking time so that the appliance does not

Tip:

switch off when you do not want it to, e.g. with an

extremely long preparation time. The appliance heats

up until the set cooking time has elapsed.

Possible cause

The fuse is faulty

Power cut

The child lock is activated

The appliance is in demo mode

The cooking compartment is too hot for the selected

dish or type of heating

The LED bulb is defective

information. ~ "Tested for you in our cooking studio"

on page 24

Warning – Risk of electric shock!

Incorrect repairs are dangerous. Repairs may only be

carried out and damaged power cables replaced by

one of our trained after-sales technicians. If the

appliance is defective, unplug the appliance from the

mains or switch off the circuit breaker in the fuse box.

Contact the after-sales service.

this message appears again, contact the after-sales

service.

Information/remedial action

Check in the fuse box to make sure that the fuse for

the appliance is in working order

Check whether other kitchen appliances are working

Press and hold the

goes out

Switch off the fuse in the fuse box and switch it back

on again after approx. 10 seconds. Switch on the

appliance and select "Demo mode off" in the settings.

Allow the cooking compartment to cool down and

start again

Call the after-sales service

Cooking compartment bulbs

To light the interior of your cooking compartment, your

appliance has one or more long-life LED bulbs.

However, if ever an LED bulb or the bulb's glass cover

is defective, call the after-sales service. The lamp cover

must not be removed.

button until the

symbol