ActronAir WRE-026CS Owner's Manual - Page 13
Browse online or download pdf Owner's Manual for Air Conditioner ActronAir WRE-026CS. ActronAir WRE-026CS 16 pages. Wall hung systems
Also for ActronAir WRE-026CS: Installation And Setup Manual (16 pages)
Print Page
•
When removing filter, do not touch metal
BEFORE CLEANING OR MAINTENANCE.
parts in the unit. The sharp metal edges can
CAUTION
cut you.
Only use a soft, dry cloth to wipe the unit clean.
If the unit is especially dirty, you can use a cloth
•
Do not use water to clean the inside of the
soaked in warm water to wipe it clean.
indoor unit. This can destroy insulation and
•
Do not use chemicals or chemically treated
cause electrical shock.
cloths to clean the unit
CAUTION
•
Do not use benzene, paint thinner,
CAUTION
CAUTION
•
Do not expose filter to direct sunlight when
polishing powder or other solvents to clean
the unit. They can cause the plastic surface
drying. This can shrink the filter.
•
Before changing the filter or cleaning,
Maintenance – Long Periods of Non-Use
•
•
Before changing the filter or cleaning,
Before changing the filter or cleaning,
to crack or deform.
turn off the unit and disconnect its power
•
Do not use water hotter than 40°C (104°F)
turn off the unit and disconnect its power
turn off the unit and disconnect its power
If you plan to not use your air conditioner for an extended period of time, do the following:
supply.
to clean the front panel. This can cause the
supply.
supply.
panel to deform or become discolored.
•
When removing filter, do not touch metal
•
•
When removing filter, do not touch metal
When removing filter, do not touch metal
Cleaning Your Air Filter
parts in the unit. The sharp metal edges can
parts in the unit. The sharp metal edges can
parts in the unit. The sharp metal edges can
cut you.
A clogged air conditioner can reduce the cooling
cut you.
cut you.
efficiency of your unit, and can also be bad for
•
Do not use water to clean the inside of the
your health. Make sure to clean the filter once
•
•
Do not use water to clean the inside of the
Do not use water to clean the inside of the
every two weeks.
indoor unit. This can destroy insulation and
indoor unit. This can destroy insulation and
indoor unit. This can destroy insulation and
Care and Maintenance
1. Lift the front panel of the indoor unit. The
cause electrical shock.
cause electrical shock.
cause electrical shock.
air filter is under the top air inlet grill.
LED button
•
Do not expose filter to direct sunlight when
2. Grip the tab on the end of the filter, lift it
•
Do not expose filter to direct sunlight when
•
Do not expose filter to direct sunlight when
up,then pull it towards yourself.
drying. This can shrink the filter.
drying. This can shrink the filter.
drying. This can shrink the filter.
Cleaning Your Indoor Unit
3. Now pull the filter out.
button 3 times. If you don't
4. Clean the large air filter with warm, soapy
BEFORE CLEANING OR
Air Filter Reminders (Optional)
water. Be sure to use a mild detergent.
Air Filter Reminders (Optional)
Air Filter Reminders (Optional)
MAINTENANCE
button 3 times. If you don't
5. Rinse the filter with fresh water, then shake
CAUTION
ALWAYS TURN OFF YOUR AIR CONDITIONER
off excess water.
Air Filter Cleaning Reminder
SYSTEM AND DISCONNECT ITS POWER SUPPLY
Air Filter Cleaning Reminder
Air Filter Cleaning Reminder
6. Dry it in a cool, dry place, and refrain from
BEFORE CLEANING OR MAINTENANCE.
•
Before changing the filter or cleaning,
exposing it to direct sunlight.
After 240 hours of use, the display window on
After 240 hours of use, the display window on
After 240 hours of use, the display window on
turn off the unit and disconnect its power
7. Close the front panel of the indoor unit.
the indoor unit will flash "CL." This is a reminder
CAUTION
the indoor unit will flash "CL." This is a reminder
the indoor unit will flash "CL." This is a reminder
supply.
to clean your filter. After 15 seconds, the unit will
Only use a soft, dry cloth to wipe the unit clean.
to clean your filter. After 15 seconds, the unit will
to clean your filter. After 15 seconds, the unit will
•
When removing filter, do not touch metal
If the unit is especially dirty, you can use a cloth
revert to its previous display.
revert to its previous display.
revert to its previous display.
parts in the unit. The sharp metal edges can
soaked in warm water to wipe it clean.
Do not use chemicals or chemically treated
•
To reset the reminder, press the
cut you.
To reset the reminder, press the
To reset the reminder, press the
cloths to clean the unit
on your remote control 4 times, or press the
•
Do not use water to clean the inside of the
on your remote control 4 times, or press the
on your remote control 4 times, or press the
Do not use benzene, paint thinner,
•
MANUAL CONTROL
button 3 times. If you don't
polishing powder or other solvents to clean
indoor unit. This can destroy insulation and
MANUAL CONTROL
MANUAL CONTROL
button 3 times. If you don't
button 3 times. If you don't
LED button
the unit. They can cause the plastic surface
Maintenance – Pre-Season Inspection
reset the reminder, the "CL" indicator will flash
cause electrical shock.
reset the reminder, the "CL" indicator will flash
reset the reminder, the "CL" indicator will flash
to crack or deform.
again when you restart the unit.
again when you restart the unit.
again when you restart the unit.
•
Do not use water hotter than 40°C (104°F)
After long periods of non-use, or before periods of frequent use, do the following:
•
Do not expose filter to direct sunlight when
button 3 times. If you don't
to clean the front panel. This can cause the
drying. This can shrink the filter.
Air Filter Replacement Reminder
panel to deform or become discolored.
Air Filter Replacement Reminder
Air Filter Replacement Reminder
button 3 times. If you don't
Cleaning Your Air Filter
After 2,880 hours of use, the display window on
Air Filter Reminders (Optional)
After 2,880 hours of use, the display window on
After 2,880 hours of use, the display window on
the indoor unit will flash "nF." This is a reminder
A clogged air conditioner can reduce the cooling
the indoor unit will flash "nF." This is a reminder
the indoor unit will flash "nF." This is a reminder
efficiency of your unit, and can also be bad for
to replace your filter. After 15 seconds, the unit
Air Filter Cleaning Reminder
to replace your filter. After 15 seconds, the unit
to replace your filter. After 15 seconds, the unit
your health. Make sure to clean the filter once
will revert to its previous display.
will revert to its previous display.
will revert to its previous display.
every two weeks.
CAUTION
After 240 hours of use, the display window on
1. Lift the front panel of the indoor unit. The
To reset the reminder, press the
the indoor unit will flash "CL." This is a reminder
air filter is under the top air inlet grill.
To reset the reminder, press the
To reset the reminder, press the
•
Any maintenance and cleaning of outdoor
on your remote control 4 times, or press the
2. Grip the tab on the end of the filter, lift it
to clean your filter. After 15 seconds, the unit will
on your remote control 4 times, or press the
on your remote control 4 times, or press the
up,then pull it towards yourself.
MANUAL CONTROL
button 3 times. If you don't
revert to its previous display.
unit should be performed by an authorized
MANUAL CONTROL
MANUAL CONTROL
button 3 times. If you don't
button 3 times. If you don't
3. Now pull the filter out.
reset the reminder, the "nF" indicator will flash
reset the reminder, the "nF" indicator will flash
reset the reminder, the "nF" indicator will flash
dealer or licensed service provider.
4. Clean the large air filter with warm, soapy
To reset the reminder, press the
again when you restart the unit.
water. Be sure to use a mild detergent.
again when you restart the unit.
again when you restart the unit.
on your remote control 4 times, or press the
•
Any unit repairs should be performed
5. Rinse the filter with fresh water, then shake
MANUAL CONTROL
button 3 times. If you don't
off excess water.
CAUTION
by authorized dealer or licensed servic
CAUTION
CAUTION
reset the reminder, the "CL" indicator will flash
6. Dry it in a cool, dry place, and refrain from
exposing it to direct sunlight.
provider.
again when you restart the unit.
•
Any maintenance and cleaning of outdoor
•
•
Any maintenance and cleaning of outdoor
Any maintenance and cleaning of outdoor
7. Close the front panel of the indoor unit.
unit should be performed by an authorized
Air Filter Replacement Reminder
unit should be performed by an authorized
unit should be performed by an authorized
dealer or licensed service provider.
dealer or licensed service provider.
dealer or licensed service provider.
After 2,880 hours of use, the display window on
•
Any unit repairs should be performed
the indoor unit will flash "nF." This is a reminder
•
•
Any unit repairs should be performed
Any unit repairs should be performed
to replace your filter. After 15 seconds, the unit
by authorized dealer or licensed servic
CAUTION
by authorized dealer or licensed servic
by authorized dealer or licensed servic
will revert to its previous display.
provider.
provider.
provider.
• Any unit repairs, maintenance and cleaning of outdoor unit should be performed by qualified HVAC technician.
To reset the reminder, press the
• Filter cleaning can and should be regularly performed by product owner as required.
on your remote control 4 times, or press the
Page 13
MANUAL CONTROL
button 3 times. If you don't
Page 13
Page 13
reset the reminder, the "nF" indicator will flash
again when you restart the unit.
CAUTION
•
Any maintenance and cleaning of outdoor
unit should be performed by an authorized
dealer or licensed service provider.
•
Any unit repairs should be performed
by authorized dealer or licensed servic
provider.
Owner's Manual
Clean all filters
Maintenance –
Maintenance –
Maintenance –
Long Periods of Non-Use
Long Periods of Non-Use
Long Periods of Non-Use
If you plan not to use your air conditioner for an
If you plan not to use your air conditioner for an
If you plan not to use your air conditioner for an
extended period of time, do the following:
extended period of time, do the following:
extended period of time, do the following:
Turn off the unit and
disconnect the power
Maintenance –
Pre-Season Inspection
LED button
Maintenance –
Pre-Season Inspection
After long periods of non-use, or before periods
Maintenance –
of frequent use, do the following:
Long Periods of Non-Use
CAUTION
After long periods of non-use, or before periods
of frequent use, do the following:
Do not touch air freshening (Plasma) filter for
If you plan not to use your air conditioner for an
at least 10 minutes after turning off the unit.
extended period of time, do the following:
LED button
LED button
LED button
Maintenance –
Maintenance –
Maintenance –
Pre-Season Inspection
Pre-Season Inspection
Pre-Season Inspection
After long periods of non-use, or before periods
Check for damaged wires
LED button
After long periods of non-use, or before periods
After long periods of non-use, or before periods
of frequent use, do the following:
of frequent use, do the following:
of frequent use, do the following:
LED button
LED button
LED button
Check for damaged wires
Check for damaged wires
Check for damaged wires
Check for leaks
LED button
Maintenance –
Pre-Season Inspection
e
e
CAUTION
After long periods of non-use, or before periods
Do not touch air freshening (Plasma) filter for
of frequent use, do the following:
at least 10 minutes after turning off the unit.
Make sure nothing is blocking all air inlets and outlets
Make sure nothing is blocking all air inlets and outlets
e
e
e
LED button
e
Filter Tab
Turn on FAN function until
unit dries out completely
Clean all filters
Remove batteries
3
from remote control
Turn off the unit and
disconnect the power
Turn on FAN function until
Clean Filter
Turn on FAN function until
Clean all filters
Turn on FAN function until
Turn on FAN function until
unit dries out completely
Clean all filters
Clean all filters
unit dries out completely
Fig. 5.1
unit dries out completely
unit dries out completely
Filter Tab
Turn off the unit and
Remove batteries from
Turn off the unit and
Remove batteries
Turn off the unit and
Turn off the unit and
Remove batteries
Remove batteries
isolate the power
disconnect the power
from remote control
remote control
Page 12
disconnect the power
disconnect the power
from remote control
from remote control
Clean all filters
Check for damaged wires
Turn on FAN function until
Clean all filters
unit dries out completely
Clean Filter
Replace Batteries
Turn off the unit and
Remove batteries
Replace batteries
Check for leaks
disconnect the power
from remote control
Fig. 5.1
Check for leaks
Replace batteries
Check for leaks
Check for leaks
Replace batteries
Replace batteries
Make sure nothing is blocking all air inlets and outlets
Page 12
Make sure nothing is blocking all air inlets and outlets
Make sure nothing is blocking all air inlets and outlets
Make sure nothing is blocking all air inlets and outlets
Check for damaged wires
Check for leaks
Replace batteries
Owner's Manual - Wall Hung Split System
Doc. No.9590-4011 Ver. 2 210622
Make sure nothing is blocking all air inlets and outlets
Wall Hung Split System
Turn on FAN function until
unit dries out completely
Remove batteries
from remote control
Clean all filters
Clean all filters
Clean all filters
Clean all filters
Replace batteries
Clean all filters
13