Epson 830p - PowerLite XGA LCD Projector Quick Setup

Browse online or download pdf Quick Setup for Projector Epson 830p - PowerLite XGA LCD Projector. Epson 830p - PowerLite XGA LCD Projector 2 pages. Release of emp ns connection for windows & mac upgrade from v2.50 to v2.51
Also for Epson 830p - PowerLite XGA LCD Projector: User Manual (42 pages), Operation Manual (36 pages), Operation Manual (47 pages), Supplementary Manual (1 pages), User Manual (15 pages), Brochure & Specs (4 pages), Installation Manual (19 pages), Technical Brief (7 pages), Function Manual (5 pages), Product Support Bulletin (25 pages), Product Support Bulletin (22 pages), Product Support Bulletin (28 pages), Product Support Bulletin (41 pages), Product Support Bulletin (15 pages), Product Support Bulletin (22 pages), Specification Sheet (4 pages)

Print Page

Epson

PowerLite

Quick Setup

onnect the pro j e c t o r

to your notebook

Follow these instructions to connect the projector to

your notebook. For other setup options and complete

instructions, see your User's Guide.

Locate the required cables:

Power cord

Connect the computer cable to the Computer1/Component port

on the projector.

Connect the other end to your notebook's video-out

monitor port.

NOTE:

If your notebook has a DVI connector, you need to either

use a DVI-to-VGA adapter with the included computer cable (see

your computer's documentation), or purchase an optional DVI

cable (for a higher-quality image). See your User's Guide.

u rn on your equipment

Connect the power cord to the projector, then plug the other end

into a grounded electrical outlet.

Turn on your notebook.

830p

VGA computer cable

Remove the projector's lens cover.

Press the

Power button

to turn on the projector.

The Power light flashes green

while the projector warms up

and adjusts the focus. Then

the light stays green.

NOTE:

For faster startup, you can enable the Direct Power On feature.

See the User's Guide.

djust the image

If you've turned on your notebook and you don't see an image,

press the Source Search button on the projector to select the

image source.

image source

NOTE:

If you still see a blank screen or have other display problems,

see the troubleshooting tips on the back of this sheet.

Press the Zoom (W or T) buttons to reduce or enlarge the image.

If your image looks like

to one side of the screen at an angle. Place it directly in front of the

center of the screen, facing the screen squarely, or press the

Tracking buttons on the projector.

If your image looks like

on the projector.

Power button

Power light

Select an

Zoom

to adjust the

image size

, you've placed the projector off

, press the

Sync buttons