Epson 835p - PowerLite XGA LCD Projector Operation Manual - Page 16

Browse online or download pdf Operation Manual for Projector Epson 835p - PowerLite XGA LCD Projector. Epson 835p - PowerLite XGA LCD Projector 47 pages. Release of check tool for network projectors v1.00 for windows
Also for Epson 835p - PowerLite XGA LCD Projector: User Manual (42 pages), Operation Manual (36 pages), Quick Setup (4 pages), Product Support Bulletin (30 pages), Supplementary Manual (1 pages), Brochure & Specs (4 pages), Product Information (21 pages), Installation Manual (19 pages), User Manual (1 pages), Technical Brief (7 pages), Function Manual (5 pages), Product Support Bulletin (25 pages), Product Support Bulletin (38 pages), Product Support Bulletin (12 pages), Product Support Bulletin (42 pages), Product Support Bulletin (22 pages), Product Support Bulletin (28 pages), Product Support Bulletin (41 pages), Product Support Bulletin (34 pages), Product Support Bulletin (38 pages), Product Support Bulletin (28 pages), Product Support Bulletin (15 pages), Product Support Bulletin (22 pages), Specification Sheet (4 pages)

Print Page
Epson 835p - PowerLite XGA LCD Projector Operation Manual
Registering and deleting projectors for monitoring

Procedures for registration

Procedure
A
Select the projector(s) to be registerd from the displayed list,
and then click "Edit".
The following window will be displayed.
Make the necessary settings while referring to the following table.
Display name
Enter the name of the projector(s) to be
displayed in Grouping view or Detail list view.
Up to a maximum of 32 bytes can be entered. A
space cannot be used as the first character.
Display icon
Select the icon(s) to be displayed in Grouping
view or Detail list view.
Parent group
Select when registering a projector in a group.
If no groups have been created, this cannot be
selected. s "Registering several projectors to a
monitoring group all at once"
Projector
This shows the name that has been registered on
name
the projector.
IP address
This shows the IP address for the registered
projector.
Use Serial W
This cannot be selected when registering
TCP/IP
projectors using automatic search.
conversion
adaptor.
Port Number
This cannot be selected when registering
projectors using automatic search.
Monitor
If a Monitor Password has been set for the
Password
projector, be sure to enter the Monitor Password
that has been set. If the correct password is not
entered at this time, it will not be possible to
monitor and control the projector even though it
is registered.
Description
You can enter some kind of memo about the
projector. The details you enter here will be
displayed at the projector properties.
Up to a maximum of 60 bytes can be entered.
Monitor
Select this when you want monitoring to start.
16
p.18