Epson 835p - PowerLite XGA LCD Projector Function Manual - Page 2

Browse online or download pdf Function Manual for Projector Epson 835p - PowerLite XGA LCD Projector. Epson 835p - PowerLite XGA LCD Projector 5 pages. Release of check tool for network projectors v1.00 for windows
Also for Epson 835p - PowerLite XGA LCD Projector: User Manual (42 pages), Operation Manual (36 pages), Quick Setup (4 pages), Operation Manual (47 pages), Product Support Bulletin (30 pages), Supplementary Manual (1 pages), Brochure & Specs (4 pages), Product Information (21 pages), Installation Manual (19 pages), User Manual (1 pages), Technical Brief (7 pages), Product Support Bulletin (25 pages), Product Support Bulletin (38 pages), Product Support Bulletin (12 pages), Product Support Bulletin (42 pages), Product Support Bulletin (22 pages), Product Support Bulletin (28 pages), Product Support Bulletin (41 pages), Product Support Bulletin (34 pages), Product Support Bulletin (38 pages), Product Support Bulletin (28 pages), Product Support Bulletin (15 pages), Product Support Bulletin (22 pages), Specification Sheet (4 pages)

Print Page

2. Select

Settings

3. Select

start automatically when your computer starts up.

4. Enter the IP address for the projector in the Projector IP Address field.

You cannot connect to the projector without entering a Projector IP

Address. See your projector's documentation for information on

obtaining your projector's IP address.

5. Enter the Web Control password or the password that was set using the

Epson EMP Monitor Utility in the Monitor Password field. If you

didn't set a password, don't enter anything.

6. Uncheck the boxes for the buttons that you do not want to display in

Advanced and Simple Mode.

7. Click

to save and close the settings window or

your changes and close the settings window.

from the Tool menu. You see a window like this:

if you want the Projector Control software to

to discard

Cancel

Connecting to the Projector