Siemens Family 1085 Operating And Installation Instructions - Page 31

Browse online or download pdf Operating And Installation Instructions for Washer Siemens Family 1085. Siemens Family 1085 44 pages. Computer controlled slimline frontloader

Print Page

Fault

Control lights do not

come on.

Programme does not start.

Water does not enter the

machine or detergent is

not wash away.

Rinse and Spin/End

indicator lights flash.

Detergent in chamber I is

not wash away.

Water cannot be seen in

drum.

Washing solution is not

completely drained. The

Ready/Wash and Spin/

End indicator lights flash.

Water is flowing out from

underneath the machine.

Foam coming out of the

detergent dispenser.

Cause

A fuse has triggered.

Power failure.

Plug is loose or not inserted.

Start button does not

pressed.

Water tap not turned on.

Supply hose kinked or

trapped.

Strainer in supply hose

clogged.

A program without Prewash

was selected.

This is not a fault.

The water lies below the visible part of the drum.

Loose debris is blocking

the pump.

Fluff-producing laundry was

washed at a high temperat-

ure. The water drainage

pipe or drain hose is blocked.

The thread of the supply

hose is not tight.

Leak in the drain hose.

To much detergent.

Action

Switch on/replace the fuse.

Call Customer Service if this fault

is repeated.

An interrupted programme will be

resumed when power returns. If

you wish to unload the laundry,

proceed as in Cleaning the drain

pump , Page 24.

Press the Start/Pause button.

Turn on water tap.

Clean the strainer

(refer to Page 26)

Select 90 C Cottons/coloureds

+ prewash .

Clean the pump.

(refer to Page 24)

Clean the water drainage pipe

and/or drain hose.

Tighten the thread.

Replace the drain hose.

Mix1 tablespoon of fabric softener

with 1/2 litre of water and pour

into chamber I of the detergent

dispenser.

Reduce the amount of detergent

next time.