Siemens Washing machine Instruction Manual And Installation Instructions - Page 6

Print Page

Removing the transportation protection devices

Before the machine is used for the first time, all transportation protection devices

from the back of the appliance must be removed and stored for any later transport

(i.e., relocation).

1 Remove the machine from the transport

base. Remove wedge

2 Remove the 4 screws

a screwdriver (Figure 2.1 ).

3 Remove transportation protection

devices

: Both bolts

purpose (Figure 2.2 ) remove with

a 10 mm or 13 mm spanner (depending

upon model).

Figure 1

(Figure 1 ).

with

are for this

Check to see that both plastic inserts

on the connecting carrier have also

been removed.

Refasten the screws

locations.

Close off both holes with the

provided caps

accessories package). ( Figure 2.3 )

Figure 2.1

Figure 2.2

Figure 2.3

at their original

(found in the