Epson 835p - PowerLite XGA LCD Projector Product Support Bulletin - Page 8

Browse online or download pdf Product Support Bulletin for Projector Epson 835p - PowerLite XGA LCD Projector. Epson 835p - PowerLite XGA LCD Projector 15 pages. Release of check tool for network projectors v1.00 for windows
Also for Epson 835p - PowerLite XGA LCD Projector: User Manual (42 pages), Operation Manual (36 pages), Quick Setup (4 pages), Operation Manual (47 pages), Product Support Bulletin (30 pages), Supplementary Manual (1 pages), Brochure & Specs (4 pages), Product Information (21 pages), Installation Manual (19 pages), User Manual (1 pages), Technical Brief (7 pages), Function Manual (5 pages), Product Support Bulletin (25 pages), Product Support Bulletin (38 pages), Product Support Bulletin (12 pages), Product Support Bulletin (42 pages), Product Support Bulletin (22 pages), Product Support Bulletin (28 pages), Product Support Bulletin (41 pages), Product Support Bulletin (34 pages), Product Support Bulletin (38 pages), Product Support Bulletin (28 pages), Product Support Bulletin (22 pages), Specification Sheet (4 pages)

Print Page
Epson 835p - PowerLite XGA LCD Projector Product Support Bulletin

Settings Display

Uncheck the boxes for the buttons
that you do not want to display in
Advanced Mode.

[3] How to set up EPSON Projector Control software

[Note] Be sure to set the projector to Network ON in Standby Mode in the Extended Menu.
1) Download "Epson12378.exe" from Epson website. This file contains
"ProjectorControlSetup.exe" which is used to install EPSON Projector Control for
Windows V.1.00 on the computer.
2) Set up your computer and the projector to connect over a network.
3) Start the EPSON Projector Control software as follows: "Start" "Program" "EPSON
Projector" "Projector Control V1.00." Then the main screen is displayed. Click
"Tool" "Settings" on the main screen. The setting screen is displayed.
4) Enter the Projector IP Address, click "OK" to save, and close the setting screen.
Page 4 of 5
PSB.2007.09.001
Uncheck the boxes for
the buttons that you do
not want to display in
Simple Mode.