Siemens WM10E364IL Series Instruction Manual And Installation Instructions - Page 14
Browse online or download pdf Instruction Manual And Installation Instructions for Washer Siemens WM10E364IL Series. Siemens WM10E364IL Series 36 pages.
Print Page
Programme default settings
en
Soaking
Pour soaking agent/detergent into
1.
compartment II in accordance with
the manufacturer's instructions.
Turn the programme selector to
2.
Cottons 30 °C programme.
Press the Start/Reload button.
3.
After approx. 10 minutes, press
4.
Start/Reload.
After the required soaking time,
5.
press Start/Reload again to
continue or change the programme.
Notes
Load laundry of the same colour.
■
No additional detergent is required;
■
the soaking solution is used for
washing.
0
Programme default
settings
0 Spin speed
P r o g r a m m e d e f a u l t s e t t i n g s
Before and while the selected
programme is running, the spin speed
or $ (without final spin, laundry soaks
in the last rinsing water, display panel - -
-) can be set. The effects depend on
the programme progress.
The maximum selectable spin speed
depends on the model and the set
programme.~ Page 12
5 Finished in
When you select the programme, the
relevant programme duration is
displayed.
The programme duration is
automatically adjusted when the
programme is running. Changes to the
programme default settings or
14
programme settings also change the
programme duration.
Before starting the programme, the
programme end ("Finished in" time) can
be preselected in increments of one
hour (h = hours) up to a maximum of 24
hours.
To do this, repeatedly press the
corresponding button until the required
setting is displayed.
The programme duration is
Note:
included in the selected "Finished in"
time.
After the start, the preselected time e.g.
8 h is displayed and the time counts
down to the start of the washing
programme. The programme duration is
then displayed, e.g. 2:30
(hours:minutes).
Changing the preselected time:
You can change the preselected time
after the start of the programme as
follows:
Press the Finished in button
1.
repeatedly until the required number
of hours is displayed.
Press the Start/Reload button.
2.
Adding laundry while the preselected
time continues running:
Press Start/Reload.
1.
YES lights up in the display panel.
2.
The washing machine door can be
opened and you can add laundry.
Close the washing machine door.
3.
Press the Start/Reload button. The
4.
preselected time continues to run.