Cisco 7911G - IP Phone VoIP Instructions For Use

Browse online or download pdf Instructions For Use for IP Phone Cisco 7911G - IP Phone VoIP. Cisco 7911G - IP Phone VoIP 4 pages. Unified ip phone
Also for Cisco 7911G - IP Phone VoIP: User Manual (21 pages), User Manual (25 pages), Quick Reference (2 pages), Questions And Answers (5 pages), Basic User's Manual (5 pages), User Manual (15 pages), Quick Start Manual (5 pages)

Print Page

Using a Handset, Headset, and Speaker

The Cisco Unified IP Phone 7906G and 7911G provide a speaker for hands-free listening. When you

use the speaker, you can hear the conversation but cannot talk because the phone does not contain a

built-in microphone. To talk on a call, you must use the handset.

You can use the speaker in one of two ways, depending on how your system administrator enables the

phone. Your phone may be enabled for one of the following features, but not both at the same time:

• Group Listen

• Monitor (default)

Using the Group Listen Feature

The following table shows how you can use the Group Listen feature.

If you want to...

Use the handset

Talk using the handset and listen

on the speaker at the same time

(Group Listen)

Turn off Group Listen and use the

handset

Hang up after using Group Listen Press EndCall or hang up.

Adjust the volume level for a call

Cisco Unified IP Phone 7906G and 7911G User Guide for Cisco Unified Communications Manager 8.6 (SCCP and SIP) 1

Then...

Lift it to go off-hook; replace it to go on-hook.

Press GListen.

Note

Group Listen must be enabled by your system administrator

for the GListen softkey to display.

Press GLOff.

Note

When using Group Listen, adjusting the volume only

changes the volume for the speaker and not the handset.

Press the up or down Volume button during a call or after

invoking a dial tone.

Press Save to preserve the volume level for future calls.

Using a Handset, Headset, and Speaker