Siemens WS G Series Instruction Manual And Installation Instructions - Page 17
Browse online or download pdf Instruction Manual And Installation Instructions for Washer Siemens WS G Series. Siemens WS G Series 28 pages.
Print Page
Descaling
Descaling should not be necessary if
the detergent is measured out correctly.
However, if it is required, follow the
manufacturer's instructions for the
descaling agent. Suitable descalers can
be obtained via our website or from our
after-sales service. ~ Page 20
Cleaning the detergent drawer
If the washing machine contains
detergent or fabric softener residues:
Pull out the detergent drawer. Press
1.
down the insert and fully remove the
drawer.
To remove the insert: Push the insert
2.
upwards from below with your finger.
Clean the detergent dispenser tray
3.
and insert with water and a brush,
and dry it. Clean the inside of the
housing as well.
Fit the insert and lock it in place
4.
(push the cylinder onto the guide
pin).
Push in the detergent drawer.
5.
Leave the detergent drawer open
Note:
so that any residual water can
evaporate.
Detergent solution pump
blocked
:
Warning
Risk of scalding!
When you wash at high temperatures,
the water gets very hot. If you come into
contact with the hot water, you may be
scalded.
Cleaning and maintenance
Allow the water to cool down.
Turn the tap off to prevent more
1.
water flowing in and having to be
drained via the drain pump.
Set the programme selector to the
2.
"Off" position. Unplug the mains
plug.
Open and remove the service flap.
3.
Carefully unscrew the pump cover
4.
until the water begins to flow out.
Allow the water to flow out into a
suitable container.
Residual water may leak out.
Note:
Carefully unscrew the pump cover
5.
and clean the interior, pump cover
thread and pump housing. The
impeller fan in the drain pump must
be able to rotate.
Reinsert and screw on the pump
6.
cover. The handle must be in a
vertical position.
en
17