Siemens WS09X260HK Operating And Installation Instructions - Page 22
Browse online or download pdf Operating And Installation Instructions for Washer Siemens WS09X260HK. Siemens WS09X260HK 49 pages. X 09 26
Print Page
Buzzer
Signal for switching
additional function buttons
on and off
Signal for programme
status and M" Start/Pause
button
22
The acoustic signal indicates:
- that additional functions (buttons) has been
switched on or off,
- individual programme statuses ( e.g. end of
programme), operating errors and faults and the
M" Start/Pause button has been switched on or
off.
q Press the M" Start/Pause button and turn the
programmes selector to Cottons Quick I. Hold
down the M" Start/Pause button until the signal is
emitted. The setting is stored.
i When the additional function is switched on, a long
signal sounds; when the additional function is
switch off, a short signal sounds.
q The signal can be switched off by the same way as
switching on it.
q Turn the programme selector to Cottons Quick
I , press the Rinse plus K " button and hold
on, you will hear the acoustic signal on and off
alternately, release the button when the signal is
on, the signal of M" Start/Pause button and
programme status has been switched on.
i When the programme is started by pressing the
M" Start/Pause button, a short signal sounds;
when the programme is paused by press this
button, no signal sounds.
i When the programme has ended, the acoustic
signal sounds for 10 minutes to remind the end of
the programme. If operating error and faults
occurs, the signal will sounds for caution.
q In order to swith this signal , make sure that the
signal for function buttons has been switch off or
not on in advance. Turn the programme selector to
Cottons Quick I , press the Rinse plus K "
button and hold on, you will hear the acoustic
signal on and off alternately, release the button
when the signal is off, the signal of M"
Start/Pause button and programme status has
been switched off.