Samsung W56V Owner's Manual - Page 20

Browse online or download pdf Owner's Manual for Monitor Samsung W56V. Samsung W56V 50 pages. Samsung monitor owner's manual

Print Page

Installing the Monitor Driver

How to install

1. Click " Start " , " Setting " , " Control Panel ".

2. Double click the " Display " Icon.

3. Choose the " Settings " tab and then click " Advanced.. ".

4. Choose " Monitor ".

Case1: If the "Properties" button is inactive, it means your monitor is properly configured.

Case2: If the "Properties" button is active, click the "Properties" button then follow next

5. Click " Driver " and then click on " Update Driver.. " then click on the "Next" button.

6. Choose " Display a list of the known drivers for this device so that I can choose a

specific driver " then click " Next " and then click " Have disk ".

7. Click the " Browse " button then choose A:(D:\Driver).

8. Click the " Open " button, then click " OK " button.

9. Choose your monitor model and click the " Next " button then click " Next " button.

10. Click the " Finish " button then the " Close " button.

If you can see the " Digital Signature Not Found " window then click the " Yes "button.

And click the " Finish " button then the " Close " button.

Microsoft

1. Click Start , Settings , Control Panel , and then double-click Display icon.

2. In Display Registration Information window, click Settings Tab and then click All Display

Modes .

3. Select a mode that you wish to use (Resolution, Number of colors and Vertical frequency)

and then click OK .

4. Click Apply button if you see the screen working normally after clicking Test. If the screen

is not normal, change to a different mode (lower mode of resolution, colors or frequency).

Note : If there is no Mode at All Display Modes , select the level of resolution and vertical

frequency by referring to the

Linux Operating System

To execute X-Window, you need to make the X86Config file, which is a type of system setting

file.

1. Press Enter at the first and the second screen after executing the X86Config file.

2. The third screen is for setting your mouse .

3. Set a mouse for your computer.

4. The next screen is for selecting a keyboard .

5. Set a Keyboard for your computer.

6. The next screen is for setting your monitor .

7. First of all, set a horizontal frequency for your monitor. (You can enter the frequency

directly.)

8. Set a vertical frequency for your monitor. (You can enter the frequency directly.)

9. Enter the model name of your monitor . This information will not affect the actual

execution of X-Window.

10. You have finished setting up your monitor.

Execute X-Window after setting other requested hardware.

Please stop installation

steps continually.

Windows

NT Operating System

Preset Display Modes

in the user guide.