Epson BrightLink 435Wi Specifications - Page 4

Browse online or download pdf Specifications for Projector Epson BrightLink 435Wi. Epson BrightLink 435Wi 10 pages. Networking and technology tool guide

Print Page

Monitor and control – Additional tools*

E-mail notification

The e-mail notification function can be used to send corresponding

notification messages to a preset e-mail address when a projector that

is connected to the network assumes a certain status, or experiences

a problem or alert. By using

this function, the operator

can be notified of a projector's

status or problems even

when the operator is in a

different location.

E-mail alerts

You can also set e-mail

alerts through the projector's

settings, without using the

EasyMP Monitor software.

When this feature is enabled,

the projector sends

e-mail alerts to up to three

addresses if it has any

alerts or problems.

*Available on select models. Please see individual specification sheets for details on individual products.

Monitor and control

Remote control on your

computer or smartphone

You can access the projector using

Web Remote, which will display

a virtual remote control on your

computer screen. It will let you perform

most of the operations available on

the physical remote control.

You can also use the Web Remote

via a smartphone, such as iPhone

or Blackberry.

Direct Power On/Off

The Direct Power On function enables faster setup. The projector starts

up automatically when you plug it in or turn it on with a wall switch. You

don't have to press the power button.

AMX Device Discovery

Epson projectors are equipped with AMX Device

Discovery, a technology that allows for effortless

integration with an AMX control system. The AMX

Controller recognizes the Epson projector, loads the

appropriate communications module or driver and

automatically installs it.

Using a browser to control

the projector

You can also use a standard web

browser to monitor and control the

projector through the network.

SNMP for monitoring

the projector

Network administrators can use SNMP (Simple Network Management

Protocol) to monitor projectors. You can enter up to two IP addresses.

Crestron RoomView enabled

Epson's Crestron RoomView enabled projectors will seamlessly

integrate with RoomView software without a separate A/V control box.

You can simply install RoomView Express software from Crestron's

website and start monitoring and controlling your projector.

Monitor and control