Siemens SITRANS L Series Compact Operating Instructions - Page 10
Browse online or download pdf Compact Operating Instructions for Switch Siemens SITRANS L Series. Siemens SITRANS L Series 45 pages. Capacitance transmitters
Also for Siemens SITRANS L Series: Operating Instructions Manual (33 pages), Operating Instructions Manual (50 pages), Operating Instructions Manual (44 pages)
Print Page
Safety notes
2.2 Laws and directives
2.2.4
FCC Conformity
US Installations only: Federal Communications Commission (FCC) rules
Authority to operate equipment
Changes or modifications not expressly approved by Siemens could void the user's
authority to operate the equipment.
Note
• This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment.
• This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is
likely to cause harmful interference to radio communications, in which case the user will
be required to correct the interference at his own expense.
2.2.5
CE electromagnetic compatibility (EMC) conformity
This equipment has been tested and found to comply with the following EMC standards:
EMC standard
CISPR 11:2009 + A1:2010/EN
55011:2009 + A1:2010, CLASS A
EN 61326:2013 (IEC
61326:2012)
EN61000-4-2:2009
EN61000-4-3:2006 + A1:2008 +
A2:2010
EN61000-4-4:2004 + A1:2010
EN61000-4-5:2006
EN61000-4-6:2010
EN61000-4-8:2010
10
WARNING
Title
Limits and methods of measurements of radio disturbance char-
acteristics of industrial, scientific, and medical (ISM) radio-
frequency equipment.
Electrical Equipment for Measurement, Control and Laboratory
Use – Electromagnetic Compatibility.
Electromagnetic Compatibility (EMC) Part 4-2: Testing and
measurement techniques – Electrostatic discharge immunity test.
Electromagnetic Compatibility (EMC) Part 4-3: Testing and
measurement techniques – Radiated, radiofrequency, electro-
magnetic field immunity test 2006 + A1:2008 + A2:2010.
Electromagnetic Compatibility (EMC) Part 4-4: Testing and
measurement techniques – Electrical fast transient/burst immunity
test.
Electromagnetic Compatibility (EMC) Part 4-5: Testing and
measurement techniques – Surge immunity test.
Electromagnetic Compatibility (EMC) Part 4-6: Testing and
measurement techniques – Immunity to conducted disturbances,
induced by radio-frequency fields.
Electromagnetic Compatibility (EMC) Part 4-8: Testing and
measurement techniques – Power frequency magnetic field im-
munity test.
Compact Operating Instructions, 05/2019, A5E46248119-AC
SITRANS Probe LR with mA/HART