Epson BrightLink 436Wi Quick Setup
Browse online or download pdf Quick Setup for Projector Epson BrightLink 436Wi. Epson BrightLink 436Wi 4 pages. Welcome kit
Also for Epson BrightLink 436Wi: Product Specifications (6 pages), Declaration Of Conformity (4 pages), Manual (13 pages)
Print Page
BrightLink
436Wi
®
Quick Setup
Before using the projector, make sure you read the safety instructions in the
online User's Guide.
Connect the projector
Choose from the following connections. See the sections below or the online
User's Guide for details.
Note: A USB connection is required to use interactivity on the computer.
Computer
USB port
Connect the square end of a USB cable to the projector's
(square) port. Connect the flat end of the cable to any USB port on your
computer.
Windows
XP or later: After turning on the projector, follow the on-screen
®
instructions to install the Epson USB Display software (EMP_UDSE.EXE; only
on first connection).
Note: If the software screen does not display automatically, open My
Computer or Computer, then double-click EPSON_PJ_UD.
Mac OS X 10.5.8 or higher: After turning on the projector, the setup folder
for USB Display appears in the Finder. Double-click USB Display Installer and
follow the on-screen instructions to install the Epson USB Display software
(only on first connection).
Monitor port
Connect one end of a VGA cable to the projector's Computer1 or
Computer2 port, and the other end to your computer's
you are using a laptop, switch it to external display (see "Troubleshooting").
You can also connect an audio cable.
HDMI port
Connect one end of an HDMI cable to the projector's HDMI port and the other
end to an HDMI port on your computer.
Wireless network
You can connect the projector wirelessly over an 802.11b, 802.11g, or 802.11n
wireless network. See "Project wirelessly" for instructions.
Wired network
You can connect the projector to your network using an Ethernet
See "Project over a wired network" for instructions.
*412434900*
*412434900*
VGA cable
USB cable
HDMI cable
USB TypeB
monitor port. If
®
cable.
Video device
Connect up to 5 video devices and use the Source Search button on the
projector or remote control to switch between them.
Camera, USB device, or Epson document camera DC-06
Connect a digital camera, USB flash drive, USB storage device, or Epson
document camera DC-06 to the projector's USB TypeA (flat) port.
If you connect a digital camera, USB flash drive, or USB storage device, you can
use the projector's Slideshow feature to project images. See the online User's
Guide for details.
External monitor, external speakers, and microphone
You can also connect an external monitor, external speakers, and a microphone
to your projector to enhance your presentations. See the online User's Guide for
details.
Turn on your projector
1
Turn on your computer or video source.
2
Plug in the projector. The power light on the projector turns orange.
3
Press the
power button on the projector or remote control. The
projector beeps, the power light flashes green, and then stays on.
Note: To shut down the projector, press the
unplug it. You don't have to wait for the projector to cool down.
RCA video cable (composite video)
S-Video cable
Audio cable
Component video to VGA cable
Audio cable
HDMI cable
power button twice, then