Siemens SITRANS LVL200E Instruction Manual - Page 13

Browse online or download pdf Instruction Manual for Switch Siemens SITRANS LVL200E. Siemens SITRANS LVL200E 40 pages. Vibrating switches
Also for Siemens SITRANS LVL200E: Operating Instructions Manual (44 pages), Operating Instructions Manual (16 pages), Operating Instructions Manual (40 pages)

Print Page
Siemens SITRANS LVL200E Instruction Manual
Transport
Pressure/Vacuum
Handling
SITRANS LVL200E - CONTACTLESS ELECTRONIC SWITCH
Fig. 6: Measures against moisture penetration
Caution:
Do not hold SITRANS LVL200E on the tuning fork. Particularly with
flange or tube versions, the tuning fork can be damaged just by the
weight of the instrument. Transport coated instruments very carefully
and avoid touching the tuning fork.
Remove the packaging or the protective cover just before installation.
The process fitting must be sealed if there is gauge or low pressure in
the vessel. Before use, check if the seal material is resistant against
the measured product and the process temperature.
The max. permissible pressure is specified in chapter "Technical data"
or on the type label of the sensor.
The vibrating level switch is a measuring instrument and must be
treated accordingly. Bending the vibrating element will destroy the
instrument.
Warning:
The housing must not be used to screw the instrument in! Applying
tightening force can damage internal parts of the housing.
Use the hexagon above the thread for screwing in.
4 Mounting
13