Siemens SITRANS LVL200E Operating Instructions Manual - Page 31

Browse online or download pdf Operating Instructions Manual for Switch Siemens SITRANS LVL200E. Siemens SITRANS LVL200E 44 pages. Vibrating switches
Also for Siemens SITRANS LVL200E: Instruction Manual (40 pages), Operating Instructions Manual (16 pages), Operating Instructions Manual (40 pages)

Print Page

Reaction after fault recti-

fication

MAN-100411

Depending on the reason for the fault and the measures taken, the

steps described in chapter "Set up" may have to be carried out again.

7.3

Exchanging the electronics

If the electronics module is defective, it can be replaced by the user.

In Ex applications only an electronics module with respective Ex ap-

proval may be used.

You can find all the information you need to carry out an electronics

exchange in the handbook of the new electronics module.

In general, all electronics modules of series SW60 can be inter-

changed. If you want to use an electronics module with a different

signal output, you carry out the complete setup. You find the neces-

sary, suitable operating instruction on our homepage.

Note:

Keep in mind that enamelled instrument versions need special

electronics modules. These electronics modules are called SW60E or

SW60E1.

7.4

If it is necessary to repair the instrument, please con-

tact Siemens. You find the locations on our homepage

"www.siemens.com/processautomation".

SITRANS LVL200E - Operating Instructions