Siemens Dishwahser Instructions For Use Manual - Page 18

Browse online or download pdf Instructions For Use Manual for Dishwasher Siemens Dishwahser. Siemens Dishwahser 32 pages.

Print Page

Indicator light goes out. The programme

remains stored.

If warm water is connected or if the

machine is already heated up and the

appliance door has been opened, leave

the door slightly ajar, then close it,

otherwise the appliance door can jump

open through the expansion.

In order to continue the programme

flow, switch the main switch ON again

and close the door.

Cancel programme (Reset)

Only when the master switch is ON.

Press the A and C programme

buttons simultaneously and hold them

pressed for approx. 3 sec.

The programme continues for approx.

1 min.

The PROGRAMME END indicator and

the indicator for the programme that

has just been terminated light up.

Set main switch

Close the detergent compartment

To restart the dishwasher, set main switch

to ON again and select desired

programme.

Changing the programme

It is possible to change the programme

selection after you have switched the

dishwasher on, provided that you have not

yet closed the door.

If it is necessary to change the programme

after this, the programme cycle that has

already begun (e.g. washing) will still carry

on to the end.

to OFF.

Additional functions *

on some models additional functions

can be set with the buttons.

Washing contents of UPPER

RACK only *

If you have a small number of dishes to

wash in the upper rack (e.g. glasses, cups,

plates), switch on the UPPER RACK

function. If you select the UPPER RACK

function, the lower rack must be empty.

Add a reduced amount of detergent

compared to that which is recommended

for a full load.

Extra dry*

If you press the "Extra dry" button, you

will receive a higher temperature in all

programmes in the final rinse and

therefore an improved drying result.

(please note that higher temperatures

might have an effect on delicate items).