Siemens iQ500 SX Series Operating Instructions Manual - Page 33

Browse online or download pdf Operating Instructions Manual for Dishwasher Siemens iQ500 SX Series. Siemens iQ500 SX Series 36 pages.

Print Page

Drinking water connection

1. Fasten the drinking water connection

to the tap according

to the installation instructions using

the enclosed parts.

Ensure that the drinking water

connection is not kinked, crushed

or twisted.

2. When replacing the appliance,

always use a new water supply hose.

Water pressure:

at least 0.05 MPa (0.5 bar), maximum

1 MPa (10 bar). At a higher water

pressure: connect pressure-reducing

valve ahead.

Inlet rate:

minimum 10 litres/minute

Water temperature:

for cold water connection only.

Installation and connection

Electrical connection

Connect the appliance to an

alternating current only, ranging from

220 V to 240 V and 50 Hz or 60 Hz

via a correctly installed socket with

protective earth conductor. See

rating plate for required fusing 92.

The socket must be near

the appliance and freely accessible

following installation.

If the plug is not freely accessible, an

allpole disconnector with a contact

opening of at least 3 mm must be

fitted on the installation side

to satisfy the relevant safety

instructions.

The connection may be modified by

technicians only.

A power cord extension may be

purchased from customer service

only.

Use only a residual current operated

circuit-breaker which features

the symbol ‚. Only this extension

guarantees compliance with

the currently valid regulations.

The appliance features a water

damage protection system. Please

note the system will not function

unless the power supply

is connected.

aus