Siemens SN Series Instruction Manual - Page 29

Browse online or download pdf Instruction Manual for Dishwasher Siemens SN Series. Siemens SN Series 48 pages. Dishwasher
Also for Siemens SN Series: Operating Insructions (38 pages), Operating Instructions Manual (38 pages), Operating Instructions Manual (42 pages), Operating Instructions Manual (42 pages), Operating Instructions Manual (44 pages), Operating Instructions Manual (46 pages), Operating Instructions Manual (44 pages), Operating Instructions Manual (42 pages), Operating Instructions Manual (40 pages), Operating Instructions Manual (42 pages), Operating Instructions Manual (44 pages), Operating Instructions Manual (40 pages)

Print Page
Siemens SN Series Instruction Manual
Press START button P.
4.
The delay timer has been activated.
To clear the specified delay, press
5.
the button @ - or + repeatedly until
)" œ ‹‹ appears in the display
window.
Until the programme has started, you
can change your selection in any way
you like.

Programme end

The programme has finished when the
value ‹:‹‹ appears in the display
window )".
Auto Power Off (Automatic
switch off after end of
programme) or interior
lighting *
To save power you can set the
A u t o P o w e r O f f
dishwasher to switch off automatically
from 1 minute to 120 minutes after the
end of its programme. You can choose
a setting from ˜:‹‹ to ˜:‹ƒ.
˜:‹‹ Appliance does not switch off
automatically.
The interior light 1" comes on
when the door is opened
irrespective of whether the
ON/OFF switch ( is switched
on or off. When the door is closed
the light is off. If the door remains
open for longer than 60 minutes
the light will switch off
automatically. The interior light
1" switches on only if the setting
˜:‹‹ has been selected.
˜:‹‚ Appliance switches off after 1
minute.
˜:‹ƒ The appliance switches off after
120 minutes.
Operating the appliance en
Here's how to change the setting:
Switch on ON/OFF switch (.
1.
Hold down the programme button
2.
# and then repeatedly press the
START button P until •:‹...
appears in the display window.
Release both buttons.
3.
The LED of the # button flashes
and the digital display )" lights up
to show the value •:‹....
Press the programme button #
4.
repeatedly until the value ˜:‹...
appears in the display window )".
Press the programme button 3.
5.
Each time the button is pressed, the
set value increases by one level;
when it reaches the value ˜:‹ƒ the
display jumps back to ˜:‹‹.
Press START button P.
6.
The set value is saved.
* depending on the features of your
dishwasher

Switching off the appliance

Shortly after the end of the
programme:
Switch off ON/OFF switch (.
1.
Turn off water supply (does not
2.
apply to appliances with Aqua-Stop).
Remove the utensils when they have
3.
cooled down.
When the programme ends,
Note:
leave the appliance to cool down a
while before opening it. This will prevent
steam from escaping and causing
long-term damage to your built-in
furniture.
29