Cisco 7942G - Unified IP Phone VoIP Datasheet - Page 4

Browse online or download pdf Datasheet for IP Phone Cisco 7942G - Unified IP Phone VoIP. Cisco 7942G - Unified IP Phone VoIP 5 pages. Unified communications manager 9.0 (sccp and sip)
Also for Cisco 7942G - Unified IP Phone VoIP: User Manual (23 pages), Installation Manual (12 pages), User Manual (6 pages), User Manual (4 pages), Administration Manual (12 pages), User Manual (13 pages), User Manual (17 pages), User Manual (12 pages), User Manual (16 pages), Manual (11 pages), User Manual (6 pages), Administration Manual (16 pages), Troubleshooting And Maintenance (27 pages)

Print Page
Cisco 7942G - Unified IP Phone VoIP Datasheet
All contents are Copyright © 2007, 2008 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.

Ordering Information

To place an order, visit the
Software
Center.
Table 4.
Ordering Information—Phone/license
Part Number
CP-7942G
CP-7942G=
CP-7942G-CH1
CP-7942G-CCME
All Cisco Unified IP phones require the purchase of a phone technology license,
Note:
regardless of call protocol being used.
Table 5.
Ordering Information—Accessories
Part Number
CP-LCKNGWALLMOUNT=
CP-WALLMOUNTKIT=
CP-LCKNGWALLMNT2=
CP-PWR-CUBE-3=
CP-PWR-INJ=
Table 6.
Ordering Information—AC Country Power Cords
Part Number
CP-PWR-CORD-AP=
CP-PWR-CORD-AR=
CP-PWR-CORD-AU=
CP-PWR-CORD-CE=
CP-PWR-CORD-CN=
CP-PWR-CORD-JP=
CP-PWR-CORD-NA=
CP-PWR-CORD-SW=
CP-PWR-CORD-UK=
Cisco Ordering Home
Page. To download software, visit the
Description
Cisco Unified IP Phone 7942G
Cisco Unified IP Phone 7942G, spare
Cisco Unified IP Phone 7942G, for Channels, with one station user license
Cisco Unified IP Phone 7942G, for Channels, with one Cisco Unified Communications
Manager Express station user license
Description
Locking wall-mounting kit, flat (recommended version)
Nonlocking wall-mounting kit, slanted
Locking wall-mounting kit, slanted
Local power adapter for sites where PoE is not available; refer to Table 6 to select the
correct regional power cord. CP-PWR-CUBE-3= is compatible with and can replace CP-
PWR-CUBE-2=.
Single-port midspan power injector with integrated power supply, specifically designed and
tested for use with all Cisco Unified IP Phones. May be used as an alternative to the existing
Cisco phone local power adapter (CP-PWR-CUBE-3=) and can support a maximum
distance of 100 meters between an unpowered switch and a Cisco Unified IP Phone.
Description
Asia Pacific
Argentina
Australia
European Community
China
Japan
North America
Switzerland
United Kingdom
Data Sheet
Cisco
Page 4 of 5