Cisco 7942G - Unified IP Phone VoIP User Manual - Page 6

Browse online or download pdf User Manual for IP Phone Cisco 7942G - Unified IP Phone VoIP. Cisco 7942G - Unified IP Phone VoIP 17 pages. Unified communications manager 9.0 (sccp and sip)
Also for Cisco 7942G - Unified IP Phone VoIP: User Manual (23 pages), Datasheet (5 pages), Installation Manual (12 pages), User Manual (6 pages), User Manual (4 pages), Administration Manual (12 pages), User Manual (13 pages), User Manual (12 pages), User Manual (16 pages), Manual (11 pages), User Manual (6 pages), Administration Manual (16 pages), Troubleshooting And Maintenance (27 pages)

Print Page

Cloud Voice Service

Preference Setup

2.1

1. Press the Settings button.

2. Use the Scroll keys to highlight Ring Type in the

3. Press the Select soft key to display a list of Ring

4. Press the Scroll key to highlight one of the

5. Press the Play soft key to hear a Ring Type.

6. Press the Select and then press the OK soft key to

7. Press the Save soft key to save your selection and

2.2

1. While the phone is not in use, press the Up or Down Volume keys to adjust

2. When the phone is ringing, press the Up or Down Volume keys to adjust volume

3. To save the volume setting, press the Settings button and then press the Save

2.3

1. During a call, press the Volume key to increase or decrease the volume of your

2. To save the volume setting, press the Settings button and then press the Save

2.4

1. Press the Settings button.

2. Use the Scroll button to highlight Contrast in the Setting menu.

3. Press the Select soft key to select the Contrast option.

4. Press the Up or Down soft key to set LCD contrast.

5. Press the OK soft key to accept the changes.

6. Press the Save soft key to save the new contrast setting and exit the Settings

menu.

Version 1.0

Settings menu.

Types.

available Ring Types.

choose the Ring Type.

exit to the main menu.

volume to the desired level.

to the desired level.

soft key.

Handset, Speakerphone or Headset.

soft key.

Note: The volume setting will only be changed while the respective feature is in use.