Siemens EC9A SB9 Series User Manual And Installation Instructions - Page 6

Browse online or download pdf User Manual And Installation Instructions for Hob Siemens EC9A SB9 Series. Siemens EC9A SB9 Series 21 pages.

Print Page
en Installation instructions
An ingress of moisture can cause an electric
shock.
▶ Do not use steam- or high-pressure clean-
ers to clean the appliance.
The insulation on cables of electrical appli-
ances may melt if it touches hot parts of the
appliance.
▶ Never bring electrical appliance cables into
contact with hot parts of the appliance.
WARNING ‒ Risk of injury!
Faults or damage to the appliance and re-
pairs that have not been carried out correctly
are dangerous.
▶ Never switch on the appliance if there is a
fault with it.
▶ If the appliance is faulty, unplug the mains
plug or switch off the fuse in the fuse box.
Shut off the gas supply and call the after
sales service.
▶ Always have repairs carried out to the ap-
pliance and damaged gas lines replaced
by trained, specialist personnel.
2  Installation instructions
Observe this information when installing the appliance.
2.2 Preparing to install
These built-in cooktops are intended to be inserted in a worktop cutout.
¡ Make a cut-out in the worktop with the required di-
mensions.
6
Cookware that is not the right size, or that is
damaged or incorrectly positioned may cause
serious injuries.
▶ See the notes on cookware.
When switching on the burner, sparks are
generated in the ignition plugs.
▶ Never touch the ignition plugs while the
burner is being lit.
If a control knob is too stiff to turn or it is
loose, it must no longer be used.
▶ Contact our after-sales service immediately
to have the control knob repaired or re-
placed.
WARNING ‒ Risk of suffocation!
Children may put packaging material over
their heads or wrap themselves up in it and
suffocate.
▶ Keep packaging material away from chil-
dren.
▶ Do not let children play with packaging ma-
terial.
Children may breathe in or swallow small
parts, causing them to suffocate.
▶ Keep small parts away from children.
▶ Do not let children play with small parts.
2.1 Statutory requirements
This installation must conform with the following:
¡ Manufacturer's Installation instructions
¡ Local Gas Fitting Regulations
¡ Municipal Building Codes
¡ Refer to AS/NZS 5601.1 for Gas Installations
¡ S.A.A. Wiring Code
¡ Local Electrical Regulations
¡ Any other statutory regulations